工具・機材

Hose Clamp 3D Models: STL Files for Printing

This collection gathers 3D models of hose clamps, from ratcheting and adjustable rings to fixed-diameter versions sized for a specific tube. It also covers related parts such as garden hose connectors, tube end caps and mounting brackets. If you need a clamp for a repair or a custom build, these STL files give you a starting point for 3D printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル45件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月13日

コレクションを見る モデル8872件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル8872件をすべて表示
カテゴリについて

«Hose Clamp 3D Models: STL Files for Printing»

The models differ mainly in how they hold a hose. Ratcheting and adjustable designs close over a range of diameters and are usually made of several interlocking parts, while fixed-size clamps are drawn for one measured tube and print as a single ring. Aquarium and flexible-tube versions tend to be smaller and thinner, and workshop or vehicle clamps often include a bracket or a mount so the hose stays fixed to a frame.

Before printing, check the inner diameter the author lists and compare it with your hose, since a clamp that is a millimetre too tight will not close. Look at the number of parts, how they assemble, and whether the author notes supports, orientation or a specific material. Photos of real prints on the model page show how the clamp behaves after printing better than a render does.

If the results feel narrow, try other terms for the same idea: tube clamp, pipe clip, cable clip, hose holder, barb fitting or end cap. Related searches such as dust collection, aquarium, garden irrigation or bicycle routing lead to clamps made for those setups. Changing the size in the query, for example a diameter in millimetres, also brings up different models.

FAQ

よくある質問

What size hose clamp should I print?
Measure the outer diameter of the hose where the clamp sits, then compare it with the inner diameter given on the model page. Adjustable designs cover a range, while fixed rings are drawn for one size.
Do hose clamp models need supports?
It depends on the shape. Rings that lie flat often print without them, while clamps with tabs, threads or overhangs may need supports. The author usually states this in the description or print settings.
Which material works for a printed hose clamp?
It depends on the load and the environment. Many people use common rigid filaments for light duty, and flexible filament where the clamp has to bend. Check what material the author lists for the model.
Can a printed clamp replace a metal one?
For light holding tasks a printed clamp can work, but pressure, heat and vibration affect how it performs. Look at the wall thickness and the way the parts lock together before deciding.
関連
暮らし・日用品

3D Printing Hose Clamp Mounts and STL Files

モデル12308件
工具・機材

3D Printable Clamps: STL Models for Shop and Desk

モデル172350件
ガーデニング

Hose 3D Models: Connectors, Holders and Adapters

モデル24840件
工具・機材

Clamp Mount 3D Models: STL Files for Desks and Pipes

モデル13351件
工具・機材

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

モデル84869件
工具・機材

Metal Clamp 3D Models: STL Files for Printing

モデル3800件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く