オブジェクト

Mark4 Drone Mount 3D Models and STL Files

This collection gathers STL files for Mark4-style FPV frame mounts, from GPS and antenna holders to camera and power connector brackets. It helps you find a part for a specific frame layout before you start 3D printing. Compare the mounting points, hardware and dimensions on each model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月11日

コレクションを見る モデル664776件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル664776件をすべて表示
カテゴリについて

«Mark4 Drone Mount 3D Models and STL Files»

The most common groups are GPS and antenna mounts, camera holders for FPV or action cameras, VTX and SMA brackets, and small parts such as power connector mounts. Some designs sit at the front or bottom of the frame, while others replace a specific bracket or add a new mounting point. The shape and hole pattern change with frame size and the device being carried.

Before printing, check the dimensions and scale, the number of parts, and whether the model needs supports. Look at the hardware the author lists, such as screw sizes and insert types, and read the material and slicer settings they note. Photos of real prints can show how the part sits on a frame and where clearances matter.

Search terms can be narrowed by device or position: GPS mount, VTX antenna mount, GoPro mount, front mount, bottom mount, or XT60 mount. Adding the frame size, such as 5 inch or 7 inch, often separates parts with different hole spacing. Related searches include FPV camera holder, SMA bracket, ELRS antenna mount, and action camera bracket.

FAQ

よくある質問

What does a Mark4 mount usually hold?
Common uses include GPS modules, VTX antennas, FPV cameras, action cameras, and power connectors. The exact device depends on the frame layout and the mounting point.
How do I choose between a front and bottom mount?
Front mounts often place an antenna or camera ahead of the frame, while bottom mounts keep parts lower and can change clearance. Check the frame drawings and the space around the intended device.
What should I check before printing a Mark4 mount?
Review the dimensions, hole spacing, screw sizes, and insert type listed by the author. Also note whether the model needs supports and which material and settings the author used.
Can I adapt a mount for a different device?
Sometimes, if the hole pattern and dimensions can be changed without weakening the part. Compare the device size and mounting holes first, then edit the model or adjust the scale if needed.
関連
ミリタリー

Mark 5 Mount STL Files for 3D Printing

モデル665313件
工具・機材

3D Models for Mark4 5-Inch Mounts and FPV Gear

モデル673360件
ミリタリー

3D Models for 5-Inch FPV Drone Mounts

モデル3279件
工具・機材

FPV Drone Mounts: STL Files for 5- and 10-Inch Frames

モデル12408件
電子工作

Mark 4 7-Inch FPV Drone Parts: 3D Models and STL Files

モデル12036件
ミニチュア・ウォーゲーム

Mark 4 and Mark 5 3D Models: FPV Mounts and Helmets

モデル10992件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く