Nesneler

Mark4 Drone Mount 3D Models and STL Files

This collection gathers STL files for Mark4-style FPV frame mounts, from GPS and antenna holders to camera and power connector brackets. It helps you find a part for a specific frame layout before you start 3D printing. Compare the mounting points, hardware and dimensions on each model page. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 664776 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 664776 model
Kategori hakkında

«Mark4 Drone Mount 3D Models and STL Files»

The most common groups are GPS and antenna mounts, camera holders for FPV or action cameras, VTX and SMA brackets, and small parts such as power connector mounts. Some designs sit at the front or bottom of the frame, while others replace a specific bracket or add a new mounting point. The shape and hole pattern change with frame size and the device being carried.

Before printing, check the dimensions and scale, the number of parts, and whether the model needs supports. Look at the hardware the author lists, such as screw sizes and insert types, and read the material and slicer settings they note. Photos of real prints can show how the part sits on a frame and where clearances matter.

Search terms can be narrowed by device or position: GPS mount, VTX antenna mount, GoPro mount, front mount, bottom mount, or XT60 mount. Adding the frame size, such as 5 inch or 7 inch, often separates parts with different hole spacing. Related searches include FPV camera holder, SMA bracket, ELRS antenna mount, and action camera bracket.

FAQ

Sıkça sorulan sorular

What does a Mark4 mount usually hold?
Common uses include GPS modules, VTX antennas, FPV cameras, action cameras, and power connectors. The exact device depends on the frame layout and the mounting point.
How do I choose between a front and bottom mount?
Front mounts often place an antenna or camera ahead of the frame, while bottom mounts keep parts lower and can change clearance. Check the frame drawings and the space around the intended device.
What should I check before printing a Mark4 mount?
Review the dimensions, hole spacing, screw sizes, and insert type listed by the author. Also note whether the model needs supports and which material and settings the author used.
Can I adapt a mount for a different device?
Sometimes, if the hole pattern and dimensions can be changed without weakening the part. Compare the device size and mounting holes first, then edit the model or adjust the scale if needed.
İlgili
Askeri

Mark 5 Mount STL Files for 3D Printing

665313 model
Alet ve ekipman

3D Models for Mark4 5-Inch Mounts and FPV Gear

673360 model
Askeri

3D Models for 5-Inch FPV Drone Mounts

3279 model
Alet ve ekipman

FPV Drone Mounts: STL Files for 5- and 10-Inch Frames

12408 model
Elektronik

Mark 4 7-Inch FPV Drone Parts: 3D Models and STL Files

12036 model
Minyatürler ve savaş oyunları

Mark 4 and Mark 5 3D Models: FPV Mounts and Helmets

10992 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç