暮らし・日用品

Drawer Guide STL Models for 3D Printing

This collection gathers 3D printing models built around drawer movement: slides and tracks, rollers, replacement guides, and the inserts that sit inside a drawer. It is useful when a drawer in furniture, a workbench or an appliance no longer runs straight and you want to print a part instead of hunting for a matching spare. Most entries are small, flat parts that fit a typical 3D printer bed. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 7サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル31782件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル31782件をすべて表示
カテゴリについて

«Drawer Guide STL Models for 3D Printing»

The models here fall into a few groups. There are full slide assemblies with stops, simple track guides that only keep a drawer aligned, and rollers or wheels that ride inside a track. Some entries are replacement guides drawn for existing furniture or appliance drawers, while others are complete under-desk or tool-holder drawers. Push-to-open and latching mechanisms form a separate group, because they add a spring or catch rather than just a sliding surface.

When you open a model page, start with the dimensions: overall length, width and the drawer depth the author drew it for, since a guide that is too short or too long changes how far the drawer travels. Then look at the number of parts and how they join, whether the geometry needs supports, and the material and settings the author lists. Photos of real prints show how a printed track behaves under load better than a render does.

To narrow the results, try synonyms: slide, runner, track, rail, roller, and the mechanism you need, such as soft-close or push-to-open. Adding the object helps as well — desk, kitchen cabinet, tool chest, refrigerator, storage bin. Related searches include drawer dividers, inserts and organizers, which often appear next to guide models.

FAQ

よくある質問

What is the difference between a drawer slide and a drawer guide?
A slide is usually a full assembly with two rails that extend, while a guide is often a single track or runner that keeps the drawer aligned. Titles use both words for similar parts, so check the drawings before choosing.
How do I pick the right length for a printed drawer guide?
Measure the drawer depth and the distance the drawer should travel, then compare that with the dimensions listed on the model page. The author's size is the starting point, not the drawer you already have.
Do printed drawer guides need supports?
It depends on the geometry. Flat tracks often print without them, while parts with overhangs or catches may need them, and the author's page usually states which case applies.
Which material should I use for a drawer guide?
The model page lists the material and settings the author used. Sliding parts benefit from stiffness and wear resistance, so treat the listed values as a baseline and adjust for your setup.
関連
プリンターパーツ

3D Models of Guides and Alignment Jigs for 3D Printing

モデル22413件
暮らし・日用品

3D Models of Boxes and Storage Containers in STL

モデル4275件
暮らし・日用品

3D Models of Drawer Stands and Riser STL Files

モデル519390件
暮らし・日用品

STL Drawer Box and Organizer 3D Models

モデル6001件
暮らし・日用品

Drawer Organizer STL Models for Tools and Kitchens

モデル7842件
暮らし・日用品

Drawer Organizer STL Models for 3D Printing

モデル201506件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く