Hogar

Drawer Guide STL Models for 3D Printing

This collection gathers 3D printing models built around drawer movement: slides and tracks, rollers, replacement guides, and the inserts that sit inside a drawer. It is useful when a drawer in furniture, a workbench or an appliance no longer runs straight and you want to print a part instead of hunting for a matching spare. Most entries are small, flat parts that fit a typical 3D printer bed. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Esta colección está escrita en inglés, pero la búsqueda funciona en cualquier idioma.

Una colección de Polyzon · 48 modelos de 7 plataformas

Cómo se elabora esta colección

Polyzon reúne esta colección a partir de los resultados de búsqueda de las plataformas conectadas. Se eliminan los duplicados y los modelos sin vista previa, las coincidencias débiles van al final y el resto mantiene el orden de la búsqueda. Los modelos pertenecen a sus autores: consulta las condiciones en la página de cada modelo.

Criterios de selección: el equipo editorial de Polyzon · Texto actualizado el 12/10/2026

Ver la colección Mostrar todos: 31782 modelos →
Colección

Por dónde empezar

Todos los modelos de esta colección

Mostrar todos: 31782 modelos
Sobre la categoría

«Drawer Guide STL Models for 3D Printing»

The models here fall into a few groups. There are full slide assemblies with stops, simple track guides that only keep a drawer aligned, and rollers or wheels that ride inside a track. Some entries are replacement guides drawn for existing furniture or appliance drawers, while others are complete under-desk or tool-holder drawers. Push-to-open and latching mechanisms form a separate group, because they add a spring or catch rather than just a sliding surface.

When you open a model page, start with the dimensions: overall length, width and the drawer depth the author drew it for, since a guide that is too short or too long changes how far the drawer travels. Then look at the number of parts and how they join, whether the geometry needs supports, and the material and settings the author lists. Photos of real prints show how a printed track behaves under load better than a render does.

To narrow the results, try synonyms: slide, runner, track, rail, roller, and the mechanism you need, such as soft-close or push-to-open. Adding the object helps as well — desk, kitchen cabinet, tool chest, refrigerator, storage bin. Related searches include drawer dividers, inserts and organizers, which often appear next to guide models.

FAQ

Preguntas frecuentes

What is the difference between a drawer slide and a drawer guide?
A slide is usually a full assembly with two rails that extend, while a guide is often a single track or runner that keeps the drawer aligned. Titles use both words for similar parts, so check the drawings before choosing.
How do I pick the right length for a printed drawer guide?
Measure the drawer depth and the distance the drawer should travel, then compare that with the dimensions listed on the model page. The author's size is the starting point, not the drawer you already have.
Do printed drawer guides need supports?
It depends on the geometry. Flat tracks often print without them, while parts with overhangs or catches may need them, and the author's page usually states which case applies.
Which material should I use for a drawer guide?
The model page lists the material and settings the author used. Sliding parts benefit from stiffness and wear resistance, so treat the listed values as a baseline and adjust for your setup.
Relacionado
Piezas para impresoras

3D Models of Guides and Alignment Jigs for 3D Printing

22413 modelos
Hogar

3D Models of Boxes and Storage Containers in STL

4275 modelos
Hogar

3D Models of Drawer Stands and Riser STL Files

519390 modelos
Hogar

STL Drawer Box and Organizer 3D Models

6001 modelos
Hogar

Drawer Organizer STL Models for Tools and Kitchens

7842 modelos
Hogar

Drawer Organizer STL Models for 3D Printing

201506 modelos

Todas las categorías de modelos 3D

El catálogo completo de temáticas, del hogar al CNC, con búsqueda en todas las plataformas conectadas.

Abrir el catálogo de categorías