電子工作

RX 580 3D Printing Models: Fans, Shrouds and Backplates

This collection gathers 3D models made for RX 580 graphics cards: replacement fan blades, shrouds and ducts, backplates, and cooling mounts. It helps when a stock part is cracked, missing or worn and you would rather print a replacement than swap the whole card. Most of these files are small, so they print quickly on a typical 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 7サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月10日

コレクションを見る モデル76448件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル76448件をすべて表示
カテゴリについて

«RX 580 3D Printing Models: Fans, Shrouds and Backplates»

The models fall into a few groups. Fan blades and fan adapters replace a damaged impeller or let a standard case fan sit on the heatsink. Shrouds and ducts guide air across the fins, backplates cover the rear of the board, and mounts hold a waterblock or another cooler. Each group has its own fit points: fan diameter and screw spacing for blades, card length and slot height for shrouds, hole positions for backplates.

Before printing, measure the card instead of trusting the model name. Note the fan diameter, the distance between screw holes, the board thickness and the clearance around the cooler. Check the author's page for the material and settings they list, and look at photos of real prints to judge how the part sits. Parts that rest close to the heatsink are often printed in PETG or ABS, since PLA can soften near a warm surface, and thin blades or long shrouds may need supports or a different orientation.

Search results improve when you use the wording found on the card and in the files. Try the full name Radeon RX 580 together with the cooler style, or search by the part itself: GPU fan adapter, 92 mm fan shroud, waterblock mount, eGPU bracket. Related cards such as the RX 570 and RX 590 share cooler shapes, and ex-mining cards often need the same fan adapters, so those terms can widen the list.

FAQ

よくある質問

What should I measure before printing an RX 580 fan shroud?
Measure the fan diameter, the spacing between the mounting holes, the length and thickness of the card, and the gap around the cooler. Board designs differ between brands and revisions, so these numbers decide whether a file will sit correctly.
Can an RX 580 backplate be printed in PLA?
PLA can soften when it stays close to a warm backplate, so many makers choose PETG or ABS for parts near the heatsink. A backplate that only covers a cooler area may be fine in PLA, but the choice depends on how the card is used.
Do these models fit every RX 580 card?
No. Coolers and board layouts vary between manufacturers and even between revisions of the same card. Read the author's notes, check the dimensions in the description and compare them with your own measurements.
How do I find a model for a different graphics card?
Search by the part rather than the card: fan blade, fan adapter, shroud, duct or waterblock mount, together with a size such as 80 mm or 92 mm. Cooler shapes are often shared across several models, so related names can lead to a usable file.
関連
電子工作

3D Models for Antenna Mounts and Brackets

モデル188485件
電子工作

3D Models for Slide-In Boxes and Adapters

モデル248128件
電子工作

FPV Drone Parts: 3D Models for 5-Inch Frames

モデル859216件
電子工作

Meshtastic Node Cases: 3D Models and STL Files

モデル4244件
電子工作

PC Bracket 3D Models: GPU, Fan and Drive Mounts

モデル215928件
電子工作

3D Printing Adapters: STL Models for Threads and Mounts

モデル12744件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く