工具・機材

Square Tube Connector 3D Models to Print

This collection gathers printable connectors that join square tubes into frames, corners and junctions. Most entries are built around a fixed tube size and a fixed angle, so the geometry of the joint decides what you can assemble. If you are planning a build with square tubing, these STL files cover the usual starting points. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル47件 6サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル63777件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル63777件をすべて表示
カテゴリについて

«Square Tube Connector 3D Models to Print»

The models fall into a few families. Corner and right-angle pieces close a frame at 90 degrees, while three-way and four-way junctions split a run of tube in several directions. Adjustable-angle connectors let you set the angle yourself before tightening, and a number of files are drawn for one specific tube size, from small 10 mm profiles up to 30 mm and beyond.

Before printing, read the model page for the tube size and wall thickness the author used, since a connector drawn for one profile will not close around another. Check whether the joint relies on friction, screws or a clamp, how many separate parts need to be printed, and whether supports are needed for the internal sockets. The material and print settings listed by the author, along with photos of real prints, tell you more than the render does.

If the results look narrow, try other names for the same part: profile connector, corner bracket, tube joint, tee, cross, elbow or gusset. Related searches such as square tube frame, extrusion bracket or tube clamp often surface files that use different wording. Adding the tube size in millimetres to the query is usually the quickest way to narrow the list.

FAQ

よくある質問

How do I know which tube size a connector fits?
The tube size is normally part of the title or the description, given as an outer dimension in millimetres or inches. Compare it with the actual profile you have, including its wall thickness, before printing.
Do these connectors need screws or glue?
It depends on the design. Some are push-fit and hold by friction, others have holes for screws or a slot for a clamp. The model page usually states which method the author had in mind.
Can I scale a connector to fit a different tube?
Scaling changes the wall thickness and the fit at the same time, so a scaled part may no longer grip the tube. It is usually better to look for a file drawn for your exact profile.
What should I check in the photos of printed parts?
Look at how the sockets meet the tube, whether the corners sit flush, and how the part was oriented on the bed. These details show how the joint behaves after assembly.
関連
プリンターパーツ

Tube Connector 3D Models and STL Files

モデル40013件
暮らし・日用品

Square Pipe Connector STL Models for 3D Printing

モデル5208件
工具・機材

40x20 Tube Connectors: 3D Models and STL Files

モデル2172件
工具・機材

Square 3D Models: STL Files for Tools and Toys

モデル19523件
オブジェクト

Connector 3D Models: STL Files for Wiring and Modular Builds

モデル178845件
工具・機材

Tube Clips for 3D Printing: 50mm Pipe and Hose STL

モデル7206件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く