Ferramentas e equipamentos

Square Tube Connector 3D Models to Print

This collection gathers printable connectors that join square tubes into frames, corners and junctions. Most entries are built around a fixed tube size and a fixed angle, so the geometry of the joint decides what you can assemble. If you are planning a build with square tubing, these STL files cover the usual starting points. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 6 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 63777 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 63777 modelos
Sobre a categoria

«Square Tube Connector 3D Models to Print»

The models fall into a few families. Corner and right-angle pieces close a frame at 90 degrees, while three-way and four-way junctions split a run of tube in several directions. Adjustable-angle connectors let you set the angle yourself before tightening, and a number of files are drawn for one specific tube size, from small 10 mm profiles up to 30 mm and beyond.

Before printing, read the model page for the tube size and wall thickness the author used, since a connector drawn for one profile will not close around another. Check whether the joint relies on friction, screws or a clamp, how many separate parts need to be printed, and whether supports are needed for the internal sockets. The material and print settings listed by the author, along with photos of real prints, tell you more than the render does.

If the results look narrow, try other names for the same part: profile connector, corner bracket, tube joint, tee, cross, elbow or gusset. Related searches such as square tube frame, extrusion bracket or tube clamp often surface files that use different wording. Adding the tube size in millimetres to the query is usually the quickest way to narrow the list.

FAQ

Perguntas frequentes

How do I know which tube size a connector fits?
The tube size is normally part of the title or the description, given as an outer dimension in millimetres or inches. Compare it with the actual profile you have, including its wall thickness, before printing.
Do these connectors need screws or glue?
It depends on the design. Some are push-fit and hold by friction, others have holes for screws or a slot for a clamp. The model page usually states which method the author had in mind.
Can I scale a connector to fit a different tube?
Scaling changes the wall thickness and the fit at the same time, so a scaled part may no longer grip the tube. It is usually better to look for a file drawn for your exact profile.
What should I check in the photos of printed parts?
Look at how the sockets meet the tube, whether the corners sit flush, and how the part was oriented on the bed. These details show how the joint behaves after assembly.
Relacionados
Peças para impressoras

Tube Connector 3D Models and STL Files

40013 modelos
Casa e utilidades

Square Pipe Connector STL Models for 3D Printing

5208 modelos
Ferramentas e equipamentos

40x20 Tube Connectors: 3D Models and STL Files

2172 modelos
Ferramentas e equipamentos

Square 3D Models: STL Files for Tools and Toys

19523 modelos
Objetos

Connector 3D Models: STL Files for Wiring and Modular Builds

178845 modelos
Ferramentas e equipamentos

Tube Clips for 3D Printing: 50mm Pipe and Hose STL

7206 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias