工具・機材

Rotating Plate 3D Models: Turntables and Stands

This collection gathers STL files for rotating plates: display turntables, Lazy Susan style discs, painting stands and small print-in-place spinners. Most designs are built around a bearing, a printed axle or a snap-fit ring, so the parts list matters as much as the shape. It helps when you need to show a model from every side, paint a figure evenly or pass a shared dish around a table. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月15日

コレクションを見る モデル6011件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル6011件をすべて表示
カテゴリについて

«Rotating Plate 3D Models: Turntables and Stands»

The models differ mainly in how they rotate. Some use a standard bearing pressed into a printed seat, others rely on a printed pin and socket, and print-in-place versions come off the plate already moving. Display stands usually add a flat platform or a raised rim, while painting plates stay low and wide so a figure or part can be turned by hand.

Before printing, check the diameter and height on the model page, since a plate sized for a small figure will not carry a large model. Look at the number of parts and whether they need assembly, the bearing size the author lists, and the material and layer settings shown in the photos. Photos of real prints show how the top surface and the joint between the moving parts come out.

If the results feel narrow, try other terms for the same idea: turntable, lazy susan, display stand, rotating base, spinner or photo platform. Related searches such as cake stand, figure display, fidget or bearing cover often lead to the same kind of mechanism. Adding a diameter in millimetres or the bearing type narrows the list further.

FAQ

よくある質問

What keeps a printed rotating plate turning?
Most designs use a ball bearing, a printed axle or a snap-fit ring. The model page usually names the bearing size and whether any hardware is needed.
Can a rotating plate be printed in one piece?
Yes, print-in-place designs are made as a single file with a small gap between the moving parts. Check the clearance the author recommends, because a tight printer tolerance can fuse the joint.
Which material works for a turntable?
PLA is common for display pieces, while PETG or ABS are often chosen where the plate takes more handling. The author's page usually lists the material and settings used.
How do I choose the right diameter?
Measure what will sit on the plate and add a margin for the rim. Model pages list the outer diameter and sometimes the platform size.
関連
キッチン

Plate 3D Models: Name Plates, Build Plates, STL Files

モデル503112件
キッチン

皿・プレートスタンドの3Dモデル

モデル657678件
キッチン

3D Models of Plates with Legs and Stands

モデル11564件
ガーデニング

植木鉢の受け皿 3Dモデル

モデル12718件
暮らし・日用品

3Dプリント アクセサリー皿・装飾トレイ

モデル14212件
暮らし・日用品

3Dプリント向け小物トレー・皿のモデル

モデル236635件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く