Alet ve ekipman

Rotating Plate 3D Models: Turntables and Stands

This collection gathers STL files for rotating plates: display turntables, Lazy Susan style discs, painting stands and small print-in-place spinners. Most designs are built around a bearing, a printed axle or a snap-fit ring, so the parts list matters as much as the shape. It helps when you need to show a model from every side, paint a figure evenly or pass a shared dish around a table. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 6011 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 6011 model
Kategori hakkında

«Rotating Plate 3D Models: Turntables and Stands»

The models differ mainly in how they rotate. Some use a standard bearing pressed into a printed seat, others rely on a printed pin and socket, and print-in-place versions come off the plate already moving. Display stands usually add a flat platform or a raised rim, while painting plates stay low and wide so a figure or part can be turned by hand.

Before printing, check the diameter and height on the model page, since a plate sized for a small figure will not carry a large model. Look at the number of parts and whether they need assembly, the bearing size the author lists, and the material and layer settings shown in the photos. Photos of real prints show how the top surface and the joint between the moving parts come out.

If the results feel narrow, try other terms for the same idea: turntable, lazy susan, display stand, rotating base, spinner or photo platform. Related searches such as cake stand, figure display, fidget or bearing cover often lead to the same kind of mechanism. Adding a diameter in millimetres or the bearing type narrows the list further.

FAQ

Sıkça sorulan sorular

What keeps a printed rotating plate turning?
Most designs use a ball bearing, a printed axle or a snap-fit ring. The model page usually names the bearing size and whether any hardware is needed.
Can a rotating plate be printed in one piece?
Yes, print-in-place designs are made as a single file with a small gap between the moving parts. Check the clearance the author recommends, because a tight printer tolerance can fuse the joint.
Which material works for a turntable?
PLA is common for display pieces, while PETG or ABS are often chosen where the plate takes more handling. The author's page usually lists the material and settings used.
How do I choose the right diameter?
Measure what will sit on the plate and add a margin for the rim. Model pages list the outer diameter and sometimes the platform size.
İlgili
Mutfak

Plate 3D Models: Name Plates, Build Plates, STL Files

503112 model
Mutfak

Plate Stand 3D Models: Display Easels and STL Holders

657678 model
Mutfak

3D Models of Plates with Legs and Stands

11564 model
Bahçe

Plant Pot Saucer STL Models for 3D Printing

12718 model
Ev ve yaşam

Jewelry Dish 3D Models and STL Files

14212 model
Ev ve yaşam

3D Models for Small-Parts Trays and Plates

236635 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç