電子工作

WAGO 222 and 414 Connector Mounts: 3D Models

This collection gathers STL files that hold lever-operated wire connectors in place: rail clips, flat brackets, storage bins and small enclosures. Most of them exist because a loose connector is awkward to keep tidy inside a control cabinet, a printer bay or a junction box. The models differ mainly in how the connector is retained and how the part is fixed to a surface. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

このコレクションの本文は英語で書かれています。検索自体はどの言語でも使えます。

Polyzonのコレクション · モデル48件 4サイトから収集

このコレクションの選定方法

このコレクションは、Polyzonが対応サイトの検索結果をもとに作成しています。重複やプレビューのないモデルは除外し、関連性の低いものは後ろに回し、それ以外は検索結果の順に並べています。モデルの権利は各作者にあります。利用条件は各モデルのページでご確認ください。

選定基準：Polyzon編集部 · 本文の更新日：2026年10月12日

コレクションを見る モデル1829件をすべて表示 →
コレクション

まずはここから

このコレクションのすべてのモデル

モデル1829件をすべて表示
カテゴリについて

«WAGO 222 and 414 Connector Mounts: 3D Models»

Rail clips snap onto a profile and keep a row of connectors lined up, while flat brackets sit against a panel and hold a single block or a short strip. Storage versions take a different approach: they organise loose connectors in trays or dispenser shapes, often as inserts for a grid-based drawer system. Enclosure-style models go further and combine a cavity for the connector with an opening for a cable gland or a strain-relief feature.

Before printing, read the model page for the connector size the cavity was drawn around, since a holder made for one pole count will not accept a wider block. Look at wall thickness around the clip, the screw or slot positions, and the orientation the author printed in. Check whether supports are mentioned, which material and settings the author lists, and whether photos of finished prints show the connector seated properly.

If the results feel narrow, try other names for the same part: terminal block holder, lever nut bracket, wire connector clip, rail adapter, cable junction box. Related searches such as cable management, control cabinet organisation, printer electronics bay or drawer inserts often surface models that were not tagged with the connector name. Combining a connector term with a mounting word usually narrows the list faster than either word alone.

FAQ

よくある質問

What are these mounts used for?
They hold lever-operated wire connectors so they stay in one place instead of hanging on the cable. Common uses are control cabinets, printer electronics bays and small junction boxes.
Do the models fit every connector size?
No. Each file is drawn around a particular body width and pole count, so a holder for one size may be too tight or too loose for another. Check the dimensions listed on the model page against the connector you have.
Do these parts need support material?
It depends on the shape. Flat brackets and trays usually print without supports, while clips with overhanging lips may need them. The author's notes and photos of real prints are the quickest way to judge.
Can I scale a model to fit a different connector?
Scaling changes every dimension, including the clip that grips the rail or the screw holes, so it rarely works well. Searching for a model drawn for your connector size is usually the better route.
関連
電子工作

WAGO 222 Connector Mounts: 3D Printing STL Files

モデル1892件
電子工作

WAGO Connector Mounts: 3D Models and STL Files

モデル8549件
電子工作

Wago Box and Holder STL Models for 3D Printing

モデル2609件
電子工作

WAGO 221 Mounts and Holders: 3D Models to Print

モデル2137件
電子工作

3D Printing Junction Boxes for Wago Connectors

モデル172486件
電子工作

WAGO 221-413 Mounts: 3D Models and STL Files

モデル1571件

3Dモデルのカテゴリ一覧

暮らし・日用品からCNCまで、すべてのテーマをそろえたカタログ。対応サイトを横断して検索できます。

カテゴリ一覧を開く