电子产品

WAGO 222 and 414 Connector Mounts: 3D Models

This collection gathers STL files that hold lever-operated wire connectors in place: rail clips, flat brackets, storage bins and small enclosures. Most of them exist because a loose connector is awkward to keep tidy inside a control cabinet, a printer bay or a junction box. The models differ mainly in how the connector is retained and how the part is fixed to a surface. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 48个模型 来自4个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月12日

查看合集 查看全部1829个模型 →
合集

从这里开始

合集中的全部模型

查看全部1829个模型
关于此分类

«WAGO 222 and 414 Connector Mounts: 3D Models»

Rail clips snap onto a profile and keep a row of connectors lined up, while flat brackets sit against a panel and hold a single block or a short strip. Storage versions take a different approach: they organise loose connectors in trays or dispenser shapes, often as inserts for a grid-based drawer system. Enclosure-style models go further and combine a cavity for the connector with an opening for a cable gland or a strain-relief feature.

Before printing, read the model page for the connector size the cavity was drawn around, since a holder made for one pole count will not accept a wider block. Look at wall thickness around the clip, the screw or slot positions, and the orientation the author printed in. Check whether supports are mentioned, which material and settings the author lists, and whether photos of finished prints show the connector seated properly.

If the results feel narrow, try other names for the same part: terminal block holder, lever nut bracket, wire connector clip, rail adapter, cable junction box. Related searches such as cable management, control cabinet organisation, printer electronics bay or drawer inserts often surface models that were not tagged with the connector name. Combining a connector term with a mounting word usually narrows the list faster than either word alone.

FAQ

常见问题

What are these mounts used for?
They hold lever-operated wire connectors so they stay in one place instead of hanging on the cable. Common uses are control cabinets, printer electronics bays and small junction boxes.
Do the models fit every connector size?
No. Each file is drawn around a particular body width and pole count, so a holder for one size may be too tight or too loose for another. Check the dimensions listed on the model page against the connector you have.
Do these parts need support material?
It depends on the shape. Flat brackets and trays usually print without supports, while clips with overhanging lips may need them. The author's notes and photos of real prints are the quickest way to judge.
Can I scale a model to fit a different connector?
Scaling changes every dimension, including the clip that grips the rail or the screw holes, so it rarely works well. Searching for a model drawn for your connector size is usually the better route.
相关
电子产品

WAGO 222 Connector Mounts: 3D Printing STL Files

1899个模型
电子产品

WAGO Connector Mounts: 3D Models and STL Files

8549个模型
电子产品

Wago Box and Holder STL Models for 3D Printing

2609个模型
电子产品

WAGO 221 Mounts and Holders: 3D Models to Print

2137个模型
电子产品

3D Printing Junction Boxes for Wago Connectors

172486个模型
电子产品

WAGO 221-413 Mounts: 3D Models and STL Files

1571个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录