Mini Magnet Frogs!

These adorable mini frog magnets are a fun addition to your fridge or any metallic surface! The magnets I used are here: https://www.aliexpress.com/item/1005007252868052.html?spm=a2g0o.order_list.order_list_main.48.167f1802bpeoJg

The magnet cut out size is 11mm diameter and 3mm depth!

Don't worry if you don't have magnets tho—these frogs are still cute and make great little decorations on their own.

Print Settings:

This design is fully printed in place and works with Creality slicer’s default settings. For more detailed configurations, see below!

Seam: Back, Layer Height: 0.1-0.2mm, Infill Density: 15%, Infill Pattern: Default slicer or experiment with other patterns!, Print Speed: 50–60 mm/s, Support Type: Non-Required!, Support Density: Non-Required!, Bed Temperature: 60°, Material: I have only used PLA so far!