FNT AMS2 Pro X1C/P2S buildplate holder

MODEL OVERVIEW

TYPE: Buildplate holder for X2D as AMS 2 Pro stand

Capacity: 4, 6, 8 buildplates

USE: f ully compatible with all Bambulab 256*256mm printers and plates

Installation: Under the AMS 2 Pro only - The model is not compatible with AMS (Original Version of AMS Buildplate compatibility: Bambulab buildplates 256*256mm thick up to 1.7mm. Not compatible with Vision Encoder for X2D

Printer Compatibility: Printable on all printers minimum size printing volume 256*256mm. An enclosed printer is not required, but it is recommended.

Warning: The model is not compatible with AMS (Original Version of AMS)

The model does not accommodate other plate sizes. Does not work with plates: A1 Mini, H2S, H2D, H2C, Vision Encoder

Q/A:

Q: Can I use this model with my older AMS (AMS / Original AMS, AMS MK1)?

A: No, AMS and AMS 2 Pro are almost the same, but have slightly different dimensions. Use the specialized FNT model for your printer and AMS combination to achieve the best results.

Q: Will I also need some parts that cannot be printed?

A: No, the latest version of the model and print profiles include PINs and locking pins, so no screws are needed and the model is still very sturdy. It is still possible to use M4 screws, Neodymium magnets for stacking, or rubber feet for better stability.

Q: I already have a printed AMS 2 Pro model for my X1C. Can I store the Vision Encoder in it?

A: With great care, yes. However, the Vision Encoder has a small pad glued to the back on the bottom, which can be a problem when inserting and removing. Damage may occur. Use this model instead, or print a Vision Encoder compatible stack.

Q: Can I use 0.6/0.8mm nozzles?

A: The model has not been tested with 0.6 and 0.8 mm nozzles. Printing with nozzles larger than 0.4 mm may cause dimensional and tolerance changes and the model may not function properly.

I RECOMMEND PRINTING TOGETHER WITH THE MODEL

- Feets flexible X1C, P1 style

- FNT stand for plates holder 5-25mm - If you want to place the FNT buildplate holder on your printer, I recommend printing the 25mm version so that the plates can be pulled out and do not interfere with the display.

ALTERNATIVE MODELS for 256*256mm buildplates (X1C / P1S / P2S / X2D / A1)

Types of FNT models for 256*256mm plates: FNT BASE for X1C/P1S or P2S/X2D (left on the photo), FNT AMS /AMS 2 Pro (this model, middle), FNT Simple (on the right side) - FNT X2D/P2S BASE buildplate holder or FNT X1C/P1S BASE Anti-Vibration holder

- FNT AMS X1C/P2S buildplate holder

- FNT X1 Simple buildplate holder

Boost Me Boost Me (for free)

I design these models just for fun in my spare time — because I enjoy making useful things for the community. If this model made your day a little easier, a Boost is like giving my printer a cup of coffee ☕ so it can keep working on new ideas. Your support helps me earn filament (and occasionally even a printer) to keep creating more models for everyone. Thank you for your support — it really means a lot! 🙌 Read before printing, please

The FNT buildplate holder family has grown quite large , and with many versions available it can sometimes be difficult to find the exact one you need.

To make things easier, I prepared an overview page where all models are clearly organized by printer type, installation method, and use case . This helps you quickly find the version that fits your setup best.

Before printing, I recommend taking a quick look at the overview — another version might suit your needs even better. Link is here.

FNT AMS Holder Versions - This is WHITE AMS 2 Pro version

FNT AMS2 Pro X1C/P1S/P2S buildplate holder with button

Boost Me Please support my work if you like the model. Boosts invests in purchasing material for prototype models. Thank you. :-) Holder Versions

FNT plates holder for X1 A1 Standalone / Stackable 4 or 8 plates

FNT AMS plates holder for X1 P1 plates button SLIM - 4, 6 or 8 plates (this page)

FNT HULA / Standalone plates holder for X1

FNT Anti-Vibration feet plate storage under X1/P1

Adapters

FNT plates holder adapter for BLV style Raisers

FNT stand for plates holder 5-25mm

FNT plates holder adapter for Sanja 3D Riser Slide