Skull Rose Flower - Hueforge

Boost Me Please feel free to boost - We would hugely appreciate it :) Skulls and roses - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.8mm The Max allowed Thickness is 3.04mm and the Actual Thickness is 2.4mm

Filaments Used: #000000 PLA Sunlu Matte Black  Transmission Distance: 0.1 #5b6579 PLA BambuLab Basic Blue Gray  Transmission Distance: 2.2 #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 0.2 #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 4 unique filaments

Swap Instructions: Start with Matte Black At layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Gray At layer #22 (1.84mm) swap to white for the rest.