IT the Clown - Hueforge

Boost Me Please feel free to boost - We would hugely appreciate it :) It the clown hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size IF YOU WISH TO SCALE PLEASE DO NOT CHANGE THE Z HEIGHT

You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.64mm

Filaments Used: #000000 PLA Kingroon Black  Transmission Distance: 0.1 #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 3 #8e9089 PLA BambuLab Basic Gray  Transmission Distance: 2 #ffffff PLA sunlu white  Transmission Distance: 6.8

This print uses 4 unique filaments

Swap Instructions: Start with Kingroon Black At layer #10 (0.88mm) swap to BambuLab Basic Blue Gray At layer #17 (1.44mm) swap to BambuLab Basic Gray At layer #25 (2.08mm) swap to sunlu white for the rest.