POLYZON
Ski wall holder - rack
Ski wall holder - rack — Фото 2 из 13
Ski wall holder - rack — Фото 3 из 13
Ski wall holder - rack — Фото 4 из 13
Ski wall holder - rack — Фото 5 из 13
Ski wall holder - rack — Фото 6 из 13
Ski wall holder - rack — Фото 7 из 13
Ski wall holder - rack — Фото 8 из 13
Ski wall holder - rack — Фото 9 из 13
Ski wall holder - rack — Фото 10 из 13
Ski wall holder - rack — Фото 11 из 13
Ski wall holder - rack — Фото 12 из 13
Ski wall holder - rack — Фото 13 из 13
3D-модель · MakerWorld

Ski wall holder - rack

Сведения о модели

Площадка
MakerWorld
Цена
Бесплатно
Лицензия
PRIVATE-USE
Только для личного использования: печатать для себя, без продажи и распространения.
Форматы
3MFSTL
  • 32 Лайки
  • 225 Загрузки
  • 174 Напечатали
  • 175 В подборках
  • 1 Бусты
  • 26 Комментарии
  • 0 Просмотры

Автор:thiz3D

Опубликована

Скачать на MakerWorld

Описание

⛷️ Keep your ski gear neat, compact and solidly stored with this modular ski holder system

🧍 Wall-facing setup keeps your skis easily visible and accessible — ideal for quick grabs.

||   Space-efficient layout lets you fit up to 8 pairs per meter (or less if your skis have big large rockers).

💪 Sturdy truss-design ensures maximum strength with minimal filament.

🧵 Use truss pattern to pass-through binders, zip-ties, paracord or a small cable lock to secure your skis .

🔄 Available in M and XL :

• M = standard skis, normal to big rockers

• XL = for skis with huge rockers

🆕 v2 with larger screw-bit opening 🪛 - use this bit extension shaft if needed.

🧱 Optional wall extension available, for another 20mm depth.

🎿 Poles? All sorted!

• The hooked design naturally supports ski poles by their straps.

• Optional pole-holder module secures poles - even without straps.

Tip : use flat-headed screws or add a washer to distribute pressure on your print

🔩 Optional screw washer included in print profiles.

Check out my other ski-related designs here 👀

Ski vise & ski brake holder for maintenance

Руководства и профили печати

Профили печати и шаги

M - Standard holder (regular rockers) - v2 🏗️ Printed on its side — no supports, no waste, and maximum inter-layer strength.

PLA and PETG tested & approved.

🆕 v2 with larger screw-bit opening and optional PLA “washer”. Use the bit extension shaft if needed ( pre-drilling recommended! ).

Medium = standard size, provided you don't have huge rockers

XL holder - extra-large size (huge rocker) - v2 🏗️ Printed on its side — no supports, no waste, and maximum inter-layer strength.

PLA and PETG tested & approved.

🆕 v2 with larger screw-bit opening and optional PLA “washer”. Use the bit extension shaft if needed ( pre-drilling recommended! ).

XL = 30mm extra depth size, fits skis with huge rockers. If this would still be too small (wow, you like them big!), print the wall extension to add depth.

Warning = add a washer between the screw and PLA or PETG to distribute pressure on the printed wall

Wall Extension - PETG Print in place.

Gives you an additional 2cm distance from the wall for (super-) large rockers .

Works in PLA as well if needed.

Optional PLA "washer" to distribute screw pressure Distributes screw pressure evenly.

Fits nicely into holder (v1 & v2).

Ski pole holder (optional) for ski poles without straps Print in place

PLA or PETG

M - Standard size - PETG profile PETG specific profile (useful for those printing from their smartphone)

Теги

skiskisskiingserviceski accessoriesski storage solutionstorageorganizerrackwallwall mountski rackski polesholderwinterpetgprint in placemodularcompactmountainwinter sportsshedgaragetidystrongtruss
Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.