HueForge Dragonite [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Kexcelled Pinkish Blue Transmission Distance: 2.2 PLA PolyTerra Pastel Peach Transmission Distance: 5 PLA BambuLab Matte Mandarin Orange Transmission Distance: 3 PLA PolyLite Lemon Yellow Transmission Distance: 6.5 PLA PolyLite White Transmission Distance: 5

Swap Instructions:

Start with Black At layer #27 (2.24mm) swap to Pinkish Blue At layer #30 (2.48mm) swap to Pastel Peach At layer #50 (4.08mm) swap to Mandarin Orange At layer #52 (4.24mm) swap to Lemon Yellow At layer #54 (4.4mm) swap to White for the rest.