HueForge Pikachu sleeping [Multicolor]

***If you like what you see please give a “Like” and a “Follow”! The goal is to get over 200 followers!***

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA Protopasta Blood of My Enemies Transmission Distance: 11 PLA PolyTerra Earth Brown Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite Pro Metallic Bronze Transmission Distance: 1 PLA PolyTerra Savannah Yellow Transmission Distance: 3.5 PLA PolyLite Lemon Yellow Transmission Distance: 6.5

Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Charcoal Black At layer #19 (1.6mm) swap to Blood of My Enemies At layer #53 (4.32mm) swap to Earth Brown At layer #54 (4.4mm) swap to Red At layer #61 (4.96mm) swap to Metallic Bronze At layer #67 (5.44mm) swap to Savannah Yellow At layer #72 (5.84mm) swap to Lemon Yellow for the rest.