4-Port Keystone Surface-Mount Box

A compact, clean-looking 4-port keystone surface-mount box for standard keystone jacks. Ideal for adding network/phone/AV wall drops without cutting in a full electrical box. You don't need any screws to hold the lid to the base, as the lid slides and snaps onto the base. This model was designed for quick installs on drywall, wood, desks, or inside cabinets, with tidy cable routing and a professional finish.

1-port version: https://makerworld.com/en/models/3042580-1-port-keystone-surface-mount-box#profileId-3421562

2-port version: https://makerworld.com/en/models/2910898-2-port-keystone-surface-mount-box#profileId-3255630

6-port version: https://makerworld.com/en/models/3284633-6-port-keystone-surface-mount-box#profileId-3726045

Notes

- This model still requires purchasing a keystone insert. - There are some 3mm diameter holes on the base to screw to the wall, or you can use double-sided tape. - Keystones will only go in one way, in this case, with the tab facing up . Don't force a keystone into a slot if it's giving you too much resistance. - I've never had a problem with this model, but keystone sizes can vary slightly by brand—if your jacks are extra tight/loose, try: - Light sanding on the openings, or - A small scale tweak (e.g., 100.5–101% ), or - Print in PETG for a bit more flex. - If you’re mounting to drywall with no stud behind it, use anchors for best hold.