Halloween Haunted House Ghost & Pumpkin Bookmark

0.20mm 0.4mm Nozzle 4 Colour Halloween Bookmark Print Profile Description

Printed and tested using a 0.4 mm nozzle with a 0.20 mm layer height .

Arachne wall generation helps reproduce the smaller decorative elements, while top-surface ironing gives the finished face a smoother appearance.

Just use my supplied settings and you’ll get the print exactly as shown.

Print Details

Nozzle used: 0.4 mm Layer height: 0.20 mm Initial layer height: 0.20 mm Wall generator: Arachne Wall order: Inner/Outer Seam position: Aligned Smart scarf seam: On Scarf angle threshold: 155° Scarf steps: 10 Scarf joint for inner walls: On Role-based wipe speed: On Bridge flow: 1 Only one wall on top surfaces: Top surfaces Smooth speed discontinuity area: On Smooth coefficient: 150

Line Width

Default: 0.42 mm Initial layer: 0.50 mm Outer wall: 0.42 mm Inner wall: 0.45 mm Top surface: 0.42 mm Sparse infill: 0.45 mm Internal solid infill: 0.42 mm Support: 0.42 mm

Precision

Slice gap closing radius: 0.049 mm Resolution: 0.012 mm Arc fitting: On X-Y hole compensation: 0 mm X-Y contour compensation: 0 mm Elephant foot compensation: 0.15 mm

Ironing

Ironing: Top surfaces Pattern: Rectilinear Speed: 30 mm/s Flow: 10% Line spacing: 0.15 mm Inset: 0.21 mm

Arachne

Wall transitioning threshold angle: 10° Wall transitioning filter margin: 25% Wall transition length: 100% Wall distribution count: 1 Minimum wall width: 85% Minimum feature size: 25%

Print Notes

This profile was actually printed and tested with a 0.4 mm nozzle , as shown in the photographs.

The design contains several smaller details around the haunted house, bats and decorative background, so I recommend using the supplied Arachne and precision settings rather than changing to a standard wall generator.

The bookmark uses black, purple, orange and green .