Stanley Utility Knife Blade

This is a model of a standard Stanley utility knife blade. I wanted to make the most of my Pichi G9 knife that I got on Kickstarter by turning it into a less dangerous fidget toy.

There are two basic variations:

- Uncompensated or compensated: The uncompensated model is true to the blade specifications, while the compensated one has slightly larger alignment notches to allow for some expansion while printing. - Pointed or rounded edges: The pointed edges are true to the specification, while the rounded ones are a bit safer. Printing instructions

- Choose the version you want. - Print the .stl file as oriented (the blade is largest on the print bed). - I recommend 0.1mm layer height with ironing. Assembly

- Gently press the joint through both blades until it is fully inserted. Safety notes

- This is not a toy. - It is less dangerous than a real blade. - Please supervise your children at all times. - Best not to bring this on an airplane. Notes

- I designed this model in OpenSCAD and it's fully parameterized. If you'd like a simple modification (i.e., notch diameter, blade angle, rounding radius, etc.), send me a message and I'll see what I can do.