Silly Shell --- Sniper Barrel + MEGA XL Spigot

Silly Shell --- Sniper Barrel + MEGA XL Spigot

Silly Shell with 13mm ID barrel to rear load and shoot short darts or Elite darts. The spigot at the front can shoot MEGA XL darts.

This Silly Shell has a length of 198mm and is much longer than the normal Silly Shells and therefore more suitable for blasters like the Anemone, Wildstyle or Silly Shell launcher attachments.

I've also designed a few other unconventional multi-dart silly shells with separate airtight barrels or spigots: * 6x / 9x / 12x Short Dart Silly Shell (+Triple Ramrod) * 4x / 5x MEGA Dart Spigot Silly Shell * SNIPER + MEGA XL Spigot Silly Shell

The files are already pre-oriented.

Print settings (the same settings as for the other Silly Shells): 0,2mm layer height at least 5 walls 20% gyroid infill at least 7 top and bottom shell layers wall generator: Arachne

Print it with brim if you have poor print bed adhesion NO supports needed

Sillybutts recommends 100% infill for the first 13mm of the Silly Shells.

As with all printed barrels, it is always a very good idea to sand the inside of the barrels to smooth it out a bit.

Thanks to Sillybutts and Bruce LeedleLeedleLeedleLee for the files I could use for this remix.