KUSBA / BigTreeTech USB-C ADXL345 Magnetic bed mount (10mm round Neodymium magnets)

Magnetically attach either a KUSBA USB-C or BigTreeTech USB-C ADXL345 accelerometer to your bed slinger using eight 10mm neodymium magnets. Push magnets in using the back end of a sharpie marker. The magnets can help you store the device against your enclosure tent poles or even be used as a fridge magnet (lol). Be creative with how you use it when its not in use!

Attach a KUSBA USB-C or BigTreeTech USB-C ADXL345 to the print by pressing three M3 x H4 heat inserts underneath, OR by directly threading in two M3 x 6mm screws. I made mounting holes to support multiple ways to thread in screws!

Use two pieces of electrical tape under the magnets for additional adhesion to the bed to prevent sliding!

For additional adhesion, place the mount on a preheated bed!

Print material: PETG

Recommend print settings: 3 perimeter walls, 5 top layers, 5 bottom layers, 25% infill (gyroid/grid/honeycomb).