3D Printer Calibration Cube – Infill & Wall Test

This simple square block is designed to help you test and compare different slicer settings quickly and efficiently.

📏 Purpose

Use this model to evaluate:

- 🔹 Different infill patterns (Gyroid, Grid, Cubic, etc.)

- 🔹 Infill percentage

- 🔹 Wall count / wall thickness

- 🔹 Top and bottom layers

- 🔹 Flow / extrusion accuracy

- 🔹 Surface quality

- 🔹 Print time differences

Perfect for:

- Testing new filament

- Comparing slicer profiles

- Fine-tuning printer settings

- Checking mechanical strength differences

🖨 Suggested Test Variations

- 10%, 20%, 50% infill

- 2 vs 4 wall lines

- Different layer heights (e.g. 0.2 mm vs 0.28 mm)

- Different materials (PLA, PETG, ABS, etc.)

💡 Tip: Print multiple blocks with different settings and compare them side by side for the best results.

A simple model — but an essential tool for every 3D printing enthusiast.