Beacon Probe Mount for Voron Stealthburner X carriage

beacon probe mount designed to work with the stealthburner X carriage.

let me know if you have suggestions.

thanks

printed w/ 23% infill

in ABS

uses:

2 - 3mm thread inserts

2 - 3x6mm Button head screws

***only tested on a Voron 2.4R2 300x300 with a Rapido HF hotend / UHF***

**Heat inserts must be inserted from the bottom**

Run calibration immediately to avoid crashing the nozzle into the bed!!

beacon_calibrate *****KLIPPER*****

[beacon] x_offset: 0 # update with offset from nozzle on your machine y_offset: 26.5 # update with offset from nozzle on your machine mesh_main_direction: x mesh_runs: 2 must include serial in Beacon

[bed_mesh] algorithm: bicubic speed: 1000 mesh_min: 12.5, 26.5 mesh_max: 290, 260 probe_count: 100, 100