Hobby e makers

Flycolor ESC Mounts and Protectors: 3D Models

This collection gathers STL files that hold, cover or cool Flycolor speed controllers in RC boats and cars. Most entries are simple brackets, trays and protectors that a 3D printer can produce in a single run. It is useful when the stock mounting points in a hull or chassis do not line up with the ESC you want to use. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 6 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 1072 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1072 modelos
Sobre a categoria

«Flycolor ESC Mounts and Protectors: 3D Models»

The models fall into a few groups. Boat-oriented parts are usually flat trays or cradles that sit on a hull floor and keep the controller from sliding, while car and truck versions tend to be small brackets that bolt to a chassis rail or to an existing screw pattern. Protectors are box-like covers that shield the board, and fan mounts hold a small cooling fan above the heatsink. Decorative housings and novelty shapes appear as well, mostly as one-piece prints.

When choosing a file, compare the listed outer dimensions of the ESC with the inner dimensions of the mount, and check the screw hole spacing rather than trusting the name alone. Look at how many separate parts the design has and whether they need fasteners, tape or glue to assemble. Read the material and settings the author lists, since thin brackets behave differently in rigid and flexible filaments, and look at photos of real prints to judge wall thickness and fit.

If the first search is thin, try other words for the same object: bracket, holder, cradle, tray, base, shroud or duct. Searching by the hull or chassis the part is meant for, or by the controller's current rating, often turns up mounts filed under a different name. Related topics such as motor mounts, receiver boxes and battery straps use the same fixing points, so they can suggest a layout that also works for the ESC.

FAQ

Perguntas frequentes

What is a Flycolor ESC mount used for?
It fixes the speed controller in place inside a boat hull or on a car chassis so it cannot shift during use. Many designs also raise the controller slightly for airflow or to clear other parts.
How do I know a mount will fit my controller?
Compare the dimensions and screw spacing given on the model page with your own ESC. Where the page lists only a current rating, measure the case and the mounting holes before printing.
Which filament works for these parts?
It depends on the position: parts near heat or vibration are often printed in a tougher filament, while covers can use a stiffer one. The author's page usually names the material and settings used for the shown print.
Do these parts need supports?
Flat trays and brackets often print without them, while covers with overhangs may need them. Check the orientation shown in the author's photos and the notes on the model page.
Relacionados
Eletrônica

ESC 3D Models: Mounts, Covers and Keycaps

13963 modelos
Hobby e makers

ESC Mounts and FPV Frames: 3D Printing Models

84481 modelos
Hobby e makers

3D Models for RC ESC Mounts and Holders

1490 modelos
Fandom
Fandom

ESC and RC 3D Printing Models

4107 modelos
Hobby e makers

Hobbywing ESC Mounts: 3D Models for RC Cars

2212 modelos
Hobby e makers

Remo Hobby Top Deck and SMAX Parts: 3D Models

4783 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias