Objetos

Propeller 3D Models: STL Files for 3D Printing

This collection gathers propeller 3D models in several directions: screws for outboard motors, small propellers for scale boats, rotors for drones, and decorative or toy versions. The files are meant for 3D printing, so the blade geometry, hub and shaft fit matter more than the surface look. It helps you find a starting point and then compare how each author describes the part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 8 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 53676 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 53676 modelos
Sobre a categoria

«Propeller 3D Models: STL Files for 3D Printing»

The largest group is boat propellers, from screws sized for outboard motors to four-bladed versions for model hulls. Drone and fan rotors form a separate group: they are lighter, thinner and usually built around a specific motor mount. Decorative items, keychains and toys use the same silhouette but are simplified, while illustrative and historical models focus on shape rather than function.

Before printing, open the author's page and read the listed dimensions: diameter, pitch, number of blades, shaft diameter and spline count. Check how many parts the model has and whether it is meant to be glued or assembled on a shaft. Look at the material and settings the author mentions, and at photos of real prints, since thin blades and hubs behave differently depending on orientation and layer direction.

If a search returns little, try related wording: screw, rotor, impeller, blade, hub, outboard, trolling motor, scale boat, drone. Narrowing by use helps as well, for example model boat, RC, or display piece. You can also search by the part you need to match, such as shaft or mount, and then compare several files before choosing one to print.

FAQ

Perguntas frequentes

Can a 3D-printed propeller be used on a real boat?
It depends on the load and the material. Printed parts are common for models, tests and low-power electric drives; for a working outboard motor the forces are much higher, so the choice is up to you and the author's description.
What should I check first in a propeller STL?
Start with diameter, pitch, blade count and shaft diameter, then look at the number of parts and how they join. Photos of real prints show how the blades and hub came out.
How do I print thin propeller blades?
Orientation and layer direction decide how strong the blades are. Many authors suggest printing blades vertically or in a specific orientation, and adding a brim or supports where the geometry needs them.
How do I find a propeller for a specific motor?
Search by the mount or shaft instead of the word propeller: spline count, shaft diameter, motor model or hub type. Then compare the dimensions listed on each model page.
Relacionados
Objetos

M8 Screw 3D Models and STL Files to Browse

377970 modelos
Objetos

Screw STL Models for 3D Printing

539241 modelos
Objetos

M6 Screw 3D Models: STL Sets, Knobs and Caps

7628 modelos
Ferramentas e equipamentos

3D Models for Screw Organizers and Small Parts Trays

216698 modelos
Objetos

3D Models of Copter Propellers and Pull Rotors

11047 modelos
Veículos

Boat Screw and Propeller 3D Models

72092 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias