Nesneler

Propeller 3D Models: STL Files for 3D Printing

This collection gathers propeller 3D models in several directions: screws for outboard motors, small propellers for scale boats, rotors for drones, and decorative or toy versions. The files are meant for 3D printing, so the blade geometry, hub and shaft fit matter more than the surface look. It helps you find a starting point and then compare how each author describes the part. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 8 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 53676 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 53676 model
Kategori hakkında

«Propeller 3D Models: STL Files for 3D Printing»

The largest group is boat propellers, from screws sized for outboard motors to four-bladed versions for model hulls. Drone and fan rotors form a separate group: they are lighter, thinner and usually built around a specific motor mount. Decorative items, keychains and toys use the same silhouette but are simplified, while illustrative and historical models focus on shape rather than function.

Before printing, open the author's page and read the listed dimensions: diameter, pitch, number of blades, shaft diameter and spline count. Check how many parts the model has and whether it is meant to be glued or assembled on a shaft. Look at the material and settings the author mentions, and at photos of real prints, since thin blades and hubs behave differently depending on orientation and layer direction.

If a search returns little, try related wording: screw, rotor, impeller, blade, hub, outboard, trolling motor, scale boat, drone. Narrowing by use helps as well, for example model boat, RC, or display piece. You can also search by the part you need to match, such as shaft or mount, and then compare several files before choosing one to print.

FAQ

Sıkça sorulan sorular

Can a 3D-printed propeller be used on a real boat?
It depends on the load and the material. Printed parts are common for models, tests and low-power electric drives; for a working outboard motor the forces are much higher, so the choice is up to you and the author's description.
What should I check first in a propeller STL?
Start with diameter, pitch, blade count and shaft diameter, then look at the number of parts and how they join. Photos of real prints show how the blades and hub came out.
How do I print thin propeller blades?
Orientation and layer direction decide how strong the blades are. Many authors suggest printing blades vertically or in a specific orientation, and adding a brim or supports where the geometry needs them.
How do I find a propeller for a specific motor?
Search by the mount or shaft instead of the word propeller: spline count, shaft diameter, motor model or hub type. Then compare the dimensions listed on each model page.
İlgili
Nesneler

M8 Screw 3D Models and STL Files to Browse

377970 model
Nesneler

Screw STL Models for 3D Printing

539241 model
Nesneler

M6 Screw 3D Models: STL Sets, Knobs and Caps

7628 model
Alet ve ekipman

3D Models for Screw Organizers and Small Parts Trays

216698 model
Nesneler

3D Models of Copter Propellers and Pull Rotors

11047 model
Taşıtlar

Boat Screw and Propeller 3D Models

72092 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç