Eletrônica

Speaker Grill 3D Models for 165 mm Drivers

This collection gathers STL files for speaker grills sized around 165 mm, from generic round covers to car-specific mounts and retro arcade panels. You will find mesh patterns, adapter rings, and protective grilles that can be printed to replace broken or missing parts. Use these models to produce custom speaker protection on any standard 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 5 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 09/10/2026

Ver a coleção Mostrar todos: 33492 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 33492 modelos
Sobre a categoria

«Speaker Grill 3D Models for 165 mm Drivers»

The results include plain circular grills for 165 mm woofers, vehicle-specific rings that match factory door cutouts, and decorative mesh covers for arcade cabinets or portable electronics. Some files are thin snap-on grilles, while others are thicker frames with mounting tabs or adapter rings for larger or smaller cutouts.

Before downloading, check the author’s listed dimensions to confirm the outer diameter and hole spacing match your speaker or enclosure. Look at whether the model is printed flat or vertically, if the author recommends supports for bridging the mesh, and what wall thickness or layer height the author suggests to keep the pattern rigid without blocking sound.

If you need a different size, try synonyms such as “speaker mesh,” “grille,” or the size of your driver in millimeters or inches. You can also add terms like “car door,” “arcade,” or “customizable” to narrow the results to a specific mounting style or application.

FAQ

Perguntas frequentes

What size speaker grill should I look for if my driver is labeled 6.5 inches?
A 6.5 inch driver usually matches a 165 mm grill, but you should verify the outer diameter and hole spacing listed by the author against your actual speaker frame, since tolerances vary by brand and enclosure.
Can I scale a 165 mm speaker grill to fit a different driver size?
Scaling the STL uniformly changes both the grill pattern and the mounting holes, so it is safer to search for a file designed for your exact diameter rather than resizing a mesh cover and distorting the clip or tab geometry.
What print settings should I use for a speaker mesh cover?
Most mesh grills are modeled as thin shells with built-in openings, so the author typically specifies a wall thickness and layer height rather than solid infill; check their photos of real prints to see if the pattern remains rigid after printing.
How do I mount a 3D-printed grill to a car door or arcade cabinet?
Some designs use pressure-fit tabs, while others rely on screw holes or adapter rings that sit behind the factory bezel; verify the mounting method described on the author’s page and compare it with your available depth and screw spacing.
Relacionados
Eletrônica

3D models for 6.5-inch speaker grills and rings

131107 modelos
Eletrônica

3D Models for Speaker Grills and Mounts

2959 modelos
Eletrônica

Speaker Grills for 16 cm Drivers: 3D Models and STL

2797 modelos
Eletrônica

3D Models for 16 cm Speaker Grills and Covers

1996 modelos
Eletrônica

Speaker Grill 3D Models and STL Files

17492 modelos
Veículos

Opel Speaker Grille STL Models and Adapters

5400 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias