Elektronik

Speaker Grill 3D Models for 165 mm Drivers

This collection gathers STL files for speaker grills sized around 165 mm, from generic round covers to car-specific mounts and retro arcade panels. You will find mesh patterns, adapter rings, and protective grilles that can be printed to replace broken or missing parts. Use these models to produce custom speaker protection on any standard 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 09.10.2026

Koleksiyonu gör Tümünü göster: 33492 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 33492 model
Kategori hakkında

«Speaker Grill 3D Models for 165 mm Drivers»

The results include plain circular grills for 165 mm woofers, vehicle-specific rings that match factory door cutouts, and decorative mesh covers for arcade cabinets or portable electronics. Some files are thin snap-on grilles, while others are thicker frames with mounting tabs or adapter rings for larger or smaller cutouts.

Before downloading, check the author’s listed dimensions to confirm the outer diameter and hole spacing match your speaker or enclosure. Look at whether the model is printed flat or vertically, if the author recommends supports for bridging the mesh, and what wall thickness or layer height the author suggests to keep the pattern rigid without blocking sound.

If you need a different size, try synonyms such as “speaker mesh,” “grille,” or the size of your driver in millimeters or inches. You can also add terms like “car door,” “arcade,” or “customizable” to narrow the results to a specific mounting style or application.

FAQ

Sıkça sorulan sorular

What size speaker grill should I look for if my driver is labeled 6.5 inches?
A 6.5 inch driver usually matches a 165 mm grill, but you should verify the outer diameter and hole spacing listed by the author against your actual speaker frame, since tolerances vary by brand and enclosure.
Can I scale a 165 mm speaker grill to fit a different driver size?
Scaling the STL uniformly changes both the grill pattern and the mounting holes, so it is safer to search for a file designed for your exact diameter rather than resizing a mesh cover and distorting the clip or tab geometry.
What print settings should I use for a speaker mesh cover?
Most mesh grills are modeled as thin shells with built-in openings, so the author typically specifies a wall thickness and layer height rather than solid infill; check their photos of real prints to see if the pattern remains rigid after printing.
How do I mount a 3D-printed grill to a car door or arcade cabinet?
Some designs use pressure-fit tabs, while others rely on screw holes or adapter rings that sit behind the factory bezel; verify the mounting method described on the author’s page and compare it with your available depth and screw spacing.
İlgili
Elektronik

3D models for 6.5-inch speaker grills and rings

131107 model
Elektronik

3D Models for Speaker Grills and Mounts

2959 model
Elektronik

Speaker Grills for 16 cm Drivers: 3D Models and STL

2797 model
Elektronik

3D Models for 16 cm Speaker Grills and Covers

1996 model
Elektronik

Speaker Grill 3D Models and STL Files

17492 model
Taşıtlar

Opel Speaker Grille STL Models and Adapters

5400 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç