Hobby e makers

M-LOK Grips, Handstops and Rails: 3D Models

This collection gathers 3D models built around the M-LOK slot pattern: angled and vertical fore grips, handstops, rail covers, handguards and the small nuts and T-nuts that hold them. Most of these parts are small enough to print in one piece, which makes them a practical subject for testing fit and orientation on your 3D printer. Browsing here helps you compare shapes and mounting approaches before you commit to a longer STL print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 10/10/2026

Ver a coleção Mostrar todos: 1632 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1632 modelos
Sobre a categoria

«M-LOK Grips, Handstops and Rails: 3D Models»

The shapes differ mainly in how they change your hand position. Angled fore grips sit low and forward, vertical and stubby grips give a straight pull, and handstops or finger stops act as a short indexing point rather than a full grip. Handguards are the largest items in the group and replace the whole front section, while rails, covers, barrier stops and T-nuts are supporting parts that adapt or finish a surface.

On the author's model page, look at the mounting interface first: slot spacing, screw thread and nut size decide whether a printed part will sit where you expect. Check whether the item is a single printed body or a set of parts that needs assembly, and read the orientation and support notes, since grips with overhangs print differently upright than on their side. The material and settings the author lists, plus photos of real prints, tell you more about the result than the render does.

To narrow the search, try the spellings people use interchangeably: M-LOK, MLok and MLOK, and the abbreviations AFG, VFG and handstop. Related terms such as finger stop, barrier stop, rail cover, T-nut, KeyMod, Picatinny and airsoft platform lead to neighbouring results, and remixes often show a variant with a different angle, length or texture. Combining a part name with a mounting term usually returns a shorter, more useful list.

FAQ

Perguntas frequentes

What is the difference between an angled and a vertical fore grip?
An angled grip sits closer to the surface and tilts your hand forward, while a vertical or stubby grip stands out and gives a straight hold. The choice comes down to the hand position you want and how much space the part takes up.
Do these models need supports?
It depends on the shape and the orientation you choose. Flat-backed grips and covers often print without them, while grips with a pronounced hook or hollow body may need supports on the overhangs; the author's page usually states what was used.
Which material works for M-LOK parts?
Small grips, stops and covers are commonly printed in tougher filaments, since thin sections and screw holes take load. Check the material and settings listed on the model page and match them to the hardware you plan to use.
How do I find more models like these?
Search for the mounting pattern plus the part type, and try both the hyphenated and unhyphenated spellings. Terms such as handstop, finger stop, rail cover, T-nut and handguard open up further results.
Relacionados
Hobby e makers

3D Models: Carders, Scratchers, Card Holders

97661 modelos
Hobby e makers

Defendtex Drone 3D Models: STL Collection

2307 modelos
Hobby e makers

DIY Sim Racing Pedals: 3D Models and STL Files

2989 modelos
Hobby e makers

AAP-01 Carbine Kit 3D Models and STL Files

255977 modelos
Hobby e makers

3D Models for Rod Reel Seats and Rod Parts

10366 modelos
Hobby e makers

Fishing Rod Stands with Bells: 3D Printing Models

8205 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias