Cozinha

Saeco Knob STL Models for Coffee Machine Repair

This collection gathers STL files for knobs and small fittings used on Saeco espresso machines. It covers steam knobs, grinder adjustment dials, door and latch parts, and generic knurled knobs sized for common metric screws. When a plastic knob on a machine has cracked or gone missing, a printed replacement is one way to keep the machine working. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 39 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 1747 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 1747 modelos
Sobre a categoria

«Saeco Knob STL Models for Coffee Machine Repair»

The models fall into a few groups. Steam knobs sit on the front or side of the machine and are turned by hand, so their shape usually includes a grip pattern and a shaft or screw fitting. Grinder and dose knobs are smaller and often indexed, with markings or detents that set a position. Door, latch and infuser parts are mechanical rather than decorative and have to line up with an existing opening or hinge. A separate group is not tied to any machine: knurled knobs, butterfly knobs and thumbscrews made for standard metric screws.

Before printing, open the author's model page and read what is listed there. Check the diameter and height of the knob, the bore or thread it expects, and whether the original screw is reused or a new one is needed. Look at the number of parts and whether assembly or glue is involved, and at whether the model needs supports. The material and settings the author names matter too, since a knob that is turned under load behaves differently from a decorative one. Photos of real prints show how the grip and the shaft came out.

If the results are thin, try other words for the same part: dial, handle, grip, cap or lever, and the machine series name rather than the word knob. Searching for the screw size, such as a knurled knob for an M5 or M6 screw, often turns up generic designs that fit the same job. Related topics are worth a look as well: grinds collectors, portafilter attachments and other small machine fittings are often published by the same authors.

FAQ

Perguntas frequentes

How do I find a knob that fits my machine?
Compare the dimensions on the model page with the part you are replacing: outer diameter, height, and the bore or thread at the centre. The machine series name in the title is a starting point, not a guarantee, so measure before printing.
Do these knobs need supports?
It depends on the model. Knobs with an overhanging grip or a recessed bore often need them, while flat-backed designs may not. The author's page usually states what was used.
Which material works for a knob that is turned by hand?
A rigid filament such as PLA or PETG is common for light use, while parts under more force are often printed in a tougher material. Check what the author lists and how the part is loaded on the machine.
Can I scale a knob model to fit?
Scaling changes the bore and any thread as well as the outside, so a small adjustment may stop the screw from fitting. It is usually better to pick a model with the right centre dimensions.
Relacionados
Cozinha

Philips Saeco Knob and Part STL Models

2740 modelos
Cozinha

Saeco Switch Knob 3D Models and STL Files

5147 modelos
Cozinha

Saeco Coffee Machine 3D Models and STL Parts

664 modelos
Cozinha

Philips Saeco Switch Knob STL for 3D Printing

2672 modelos
Cozinha

Saeco Coffee Machine Caps and Lids: 3D Models

54678 modelos
Eletrônica

3D Models for Philips Saeco Mode Switch Knobs

2330 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias