Alet ve ekipman

Split Shaft Clamp STL: 3D Models for Rods and Collars

This collection gathers STL files for split shaft clamps and related parts: two-piece collars, rod mounts, tool holders and clock components. It helps you find a starting point for a repair, a custom fixture or a mechanical build on a 3D printer. Check the model page before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 451410 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 451410 model
Kategori hakkında

«Split Shaft Clamp STL: 3D Models for Rods and Collars»

The reference shows several families: split collars that clamp around a rod, shaft supports and mounts for linear motion, and larger brackets or clamps used in machine builds. Some parts are single pieces, while others are two-piece collars that close around a shaft. Tool and dart holders, clock parts and desk stands also appear, often using a shaft or clamp as a joint.

On the author's model page, check the stated dimensions and scale, the number of parts, and whether assembly uses screws, pins or a friction fit. Look at the material and settings the author lists, and review photos of real prints to judge surface finish and tolerances. For a clamp, the gap, wall thickness and screw placement matter more than the outer shape.

If you need a different size or style, try synonyms such as shaft collar, split collar, rod clamp, linear rod support or mounting bracket. Related searches include machine rebuild parts, printer axis clamps, tool holders and clock mechanisms. Adding the material or printer type can narrow results further.

FAQ

Sıkça sorulan sorular

What is a split shaft clamp used for?
It grips a round shaft or rod without needing to slide it over an end, because the split allows the clamp to open and close around the shaft. Common uses include stop collars, mounts and joints in mechanical builds.
How do I choose the right size for a shaft clamp?
Measure the shaft diameter and compare it with the dimensions listed on the model page. Check the clamp gap and screw size, since these affect how tightly the part closes.
Do split shaft clamps need supports when printed?
It depends on the orientation and the shape of the split. The author's page often shows the intended orientation and whether supports are needed; a vertical or angled split may print differently from a flat one.
Can I modify an STL for a different shaft size?
Yes, if you have the source file or a parametric model, you can adjust the inner diameter and screw holes. For a plain STL, scaling changes all dimensions, so check the wall thickness and fit after scaling.
İlgili
Alet ve ekipman

3D Printable Clamps: STL Models for Shop and Desk

177943 model
Alet ve ekipman

28 mm Pipe and Tube Holder STL Models

6317 model
Alet ve ekipman

Clamp Mount 3D Models: STL Files for Desks and Pipes

13351 model
Alet ve ekipman

Pipe Clamp 3D Models: STL Files for Tubes and Conduit

84869 model
Alet ve ekipman

Hose Clamp 3D Models: STL Files for Printing

8872 model
Alet ve ekipman

Metal Clamp 3D Models: STL Files for Printing

3800 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç