Oyuncaklar ve figürler

3D Models of Batons, Batarangs and Flexi Bats

This collection gathers STL files for batons, batarangs, flexi bats, wands and sports-style bats. You can compare how each design is built, from simple one-piece props to multi-part assemblies. It helps you find a starting point for a 3D printing project. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 40 model 2 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 1521 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 1521 model
Kategori hakkında

«3D Models of Batons, Batarangs and Flexi Bats»

The models range from telescopic batons and bat-shaped throwing props to articulated flexi toys and fantasy wands. Some are single-piece shapes, while others use sliding sections, hinges or separate parts that need assembly. Fantasy staffs and sports bats often follow a more solid form, whereas flexi designs rely on printed joints.

When choosing a model, check the listed dimensions and scale, the number of parts, and whether the author notes support requirements. Look at the material and print settings on the model page, and review photos of real prints to see how the moving sections or thin edges turned out. For articulated or telescopic pieces, clearances between parts matter more than overall size.

To narrow the search, try related terms such as telescopic baton, collapsible staff, batarangs, flexi bat, prop wand or training bat. Combining a theme with a build type, like articulated toy or multi-part prop, can separate decorative models from functional-looking shapes. You can also search by the character or franchise that inspires the prop, then check the model page for the actual geometry.

FAQ

Sıkça sorulan sorular

What is the difference between a telescopic baton and a flexi bat model?
A telescopic baton usually has sliding sections that extend, while a flexi bat uses printed joints or hinges to bend. Both may need clearance tuning and test prints to move as intended.
Do these models require supports?
It depends on the geometry and orientation. Check the author's notes and photos; some parts print without supports, while overhangs or thin details may need them.
How can I make an articulated bat or baton print move freely?
Print a small test piece first, then adjust the clearance and material settings. Too tight a gap can fuse the joints, while too loose a gap can make the parts feel disconnected.
Can I scale a baton or wand model to a different size?
Scaling changes wall thickness, joint clearance and assembly fit, so check the model page for recommended dimensions. If you resize, test the moving parts before printing the full model.
İlgili
Oyuncaklar ve figürler

Dendy Junior Baton and Prop 3D Models to Print

1161 model
Fandom

Dendy and Famicom 3D Models: Cartridges, Cases, Toys

1301 model
Oyuncaklar ve figürler

Infinity Cube 3D Models: STL Fidget Prints

21355 model
Oyuncaklar ve figürler

SpongeBob 3D Models: STL Figures, Charms and Keycaps

2545 model
Oyuncaklar ve figürler

BJD Crocodile 3D Models: Articulated and Doll-Scale STL

1186 model
Oyuncaklar ve figürler

Bratz Doll Shoes: 3D Models and STL Files

2220 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç