Alet ve ekipman

DeWalt Tool Holder 3D Models and STL Files

This collection gathers 3D models for storing and mounting DeWalt cordless tools, batteries and bits. It covers wall brackets, bench stands and holders that clip onto a printer frame. The files are meant for 3D printing, and most listings include an STL or a comparable mesh. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 673843 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 673843 model
Kategori hakkında

«DeWalt Tool Holder 3D Models and STL Files»

The models fall into a few groups. Wall and bench mounts hold a drill or impact driver in place, sometimes with a clip or a screw-on bracket. Battery brackets keep packs off the floor, while bit holders store small accessories in rows or slots. A separate group is designed around printer frames, where the holder is fixed to the machine rather than to a wall.

When you open a model page, look at the mounting method first: screw holes, adhesive pads or a clamp change how the part is used. Check the number of parts and whether they need assembly, and read what the author says about supports, layer height and material. Photos of real prints show how the hooks and clips behave under load better than a render does.

To narrow the search, try related wording such as tool mount, drill bracket, battery dock or bit organizer, and add the tool type you own. Combining a storage term with a mounting term usually returns different results than either word alone. If nothing fits, look at generic holders built around a slot or a rail, then adjust the opening in the slicer.

FAQ

Sıkça sorulan sorular

What is the difference between a tool holder and a tool mount?
A holder usually keeps the tool in a fixed place, for example on a wall or a bench, while a mount is the bracket that carries the weight and attaches to a surface. Many listings use both words for the same part.
Do these models need supports?
It depends on the shape. Flat-backed brackets often print without them, while hooks, clips and overhanging arms may need support. The author's notes on the model page usually state this.
Which material works for a tool holder?
Rigid filaments are common for brackets that carry weight, and some makers choose a tougher blend for thin clips. Check the material and settings listed by the author, since a thin hook behaves differently from a solid block.
How do I find a holder for a specific tool?
Search by the tool type together with a storage word, such as drill bracket or battery dock, and then compare the opening size and screw spacing in the description with your own tool.
İlgili
Alet ve ekipman

Tool Holder STL Models for Printers and Workshops

724065 model
Alet ve ekipman

DeWalt 3D Models: Battery and Tool Mounts as STL

19134 model
Yazıcı parçaları

Ender 3 Tool Holder STL Models for 3D Printing

12840 model
Alet ve ekipman

3D Models of Tools and Tool Accessories

452609 model
Alet ve ekipman

3D Models for DeWalt Vacuum Adapters and Nozzles

2777 model
Alet ve ekipman

DeWalt Box 3D Models and STL Files for Tool Storage

177851 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç