Ev ve yaşam

Soap Holder STL Models for Bath and Kitchen

This collection gathers STL files for soap holders, from flat dishes to draining trays that also carry a sponge. Most designs are made for 3D printing at home and cover both bathroom sinks and kitchen counters, so you can match the shape to the space you have. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 7568 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 7568 model
Kategori hakkında

«Soap Holder STL Models for Bath and Kitchen»

The range splits into a few practical groups. Simple dishes and trays hold a bar in place, while self-draining versions add ribs, slopes or a lower tray so water runs off instead of pooling. Sets combine a holder with a toothbrush cup or dispenser, and modular organizers let you stack or extend parts along a wall or shelf. Decorative pieces take animal or cloud shapes and work as small objects on their own.

Before printing, open the model page and read the dimensions the author lists, then measure your soap bar and the ledge it will sit on. Check how many parts the file contains and whether they join with clips, screws or glue, since that affects assembly time. Look at the stated material and layer height, and at photos of finished prints, because thin walls and long overhangs behave differently in PLA and PETG.

To widen the search, try synonyms such as soap dish, soap tray, sponge caddy or shower shelf, and add a room word like bathroom, kitchen or camping. Related terms include draining tray, bar soap, scrubber, toothbrush holder and organizer, which often appear on files that fit the same spot. Combining a shape word with a material or style word, for example ribbed or minimal, narrows the list further.

FAQ

Sıkça sorulan sorular

What is the difference between a soap dish and a self-draining soap holder?
A plain dish is a shallow tray that holds the bar. A self-draining version adds ribs, a slope or a second level so water drips away from the soap instead of collecting underneath it.
Which material works for a soap holder?
Authors usually list PLA or PETG, and PETG is common for wet areas because it tolerates moisture and warmth better. Check the material note on the model page and follow the temperatures the author gives.
Do these models need supports?
It depends on the geometry. Flat dishes often print without them, while overhangs, handles and drain slots may need supports. The model page or the included photos usually show the orientation the author used.
Can I scale a soap holder to fit my bar?
Yes, most files can be scaled in the slicer, but keep wall thickness in mind: scaling down too far can leave walls that are only one or two lines wide. Measure the bar and the ledge first, then adjust.
İlgili
Ev ve yaşam

Soap Dish and Dispenser 3D Models to Print

9039 model
Ev ve yaşam

Soap Organizer STL Models for Kitchen and Bathroom

181202 model
Ev ve yaşam

Soap Case STL Models for 3D Printing

2725 model
Ev ve yaşam

Soap Container STL Models for 3D Printing

59999 model
Ev ve yaşam

3D Models for Soap Boxes and Soap Dishes

5631 model
Ev ve yaşam

3D Models for Soap Dispensers: Pumps, Sleeves, Holders

26490 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç