Ev ve yaşam

Soap Container STL Models for 3D Printing

This collection gathers STL files for soap containers of several kinds: travel cases, lidded dishes, dispenser parts and holders with drain trays. It helps when you need a container shaped around a particular bar or bottle instead of a generic dish. Every entry leads to the source page, where the author's own notes apply. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 59999 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 59999 model
Kategori hakkında

«Soap Container STL Models for 3D Printing»

The models here split into a few groups. Travel cases usually close with a lid or screw together and are sized around one bar, while round dishes and puck-shaped holders are common for shaving soap and shampoo bars. Dispenser-related files cover bottles, caps and hose fittings. Holders with trays, ribs or drain openings are made to keep a bar dry between uses, and some designs add magnets or a decorative outer shell.

On the author's page, start with the stated dimensions and the bar size the container is built around, since a case that fits one brand can be tight for another. Check how many parts are involved and how they join — threads, snaps or magnets — and whether the overhangs need support. The material and settings the author lists matter for a part that stays wet, and photos of real prints show wall thickness and lid fit better than a render.

If a search returns too much, try other wording: soap case, soap dish, soap holder, shaving bowl, dispenser cap, bar soap box. Adding a place or a routine narrows results further — travel, gym, shower, kitchen, camping. Related topics such as bathroom organizers, sponge trays or bottle thread standards can lead to files that fit the same setup.

FAQ

Sıkça sorulan sorular

What size should a soap container be?
It depends on the bar you use. Measure the bar, compare it with the dimensions on the model page, and leave a little clearance so the lid closes without pressing the soap.
Does a soap container need to drain?
A bar sitting in trapped water softens quickly. Designs with a tray, ribs or a weep hole let water run off; if the model is closed, you can add openings in the slicer.
Which material works for a soap dish?
PLA is common for dishes that stay dry, while PETG or ASA handle heat and moisture better. Check the material the author lists and how the part will be cleaned.
How do I print a container with a lid?
Print the body and lid as separate parts, look at the clearance given in the file, and test the fit on a small print before running the full model.
İlgili
Ev ve yaşam

Soap Dish and Dispenser 3D Models to Print

9039 model
Ev ve yaşam

3D Models of Containers: STL Files for Printing

110747 model
Ev ve yaşam

Soap Holder STL Models for Bath and Kitchen

7568 model
Ev ve yaşam

Soap Organizer STL Models for Kitchen and Bathroom

181202 model
Ev ve yaşam

Soap Case STL Models for 3D Printing

2725 model
Ev ve yaşam

3D Models for Soap Boxes and Soap Dishes

5631 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç