Karakterler

3D Printed Feet: Anti-Vibration and Adjustable STL Files

This collection covers 3D models of feet: anti-vibration pads for 3D printers, height-adjustable legs, and dampers built around rubber pads or balls. Most files are small and print as one piece, which makes them a practical starting point for a new 3D printer owner. They help when a machine wobbles, when a case has to stand level, or when a device needs to be lifted off the desk. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 20957 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 20957 model
Kategori hakkında

«3D Printed Feet: Anti-Vibration and Adjustable STL Files»

Anti-vibration feet usually sit under the corners of a printer and are shaped to fit a specific frame profile or the original mounting points. Adjustable feet and legs work differently: they carry a threaded section, so the height can be changed after assembly. A third group uses a soft element, such as a rubber pad, a printed spring or a ball, to absorb movement instead of lifting the machine.

Before printing, look at the model page for the frame profile or bolt spacing the author lists, the number of parts, and whether supports are needed. Check the material and settings the author recommends: soft TPU is common for damping parts, while stiffer filaments suit threaded legs. Photos of real prints show how the part sits under the machine and whether the thread turns smoothly.

If the results are too narrow, try other words: dampers, isolators, leveling feet, corner pads, machine legs, or the name of the frame profile. Related searches include furniture feet, drone landing feet, and feet for cases and enclosures. Adding a printer model to the word feet usually narrows the list faster than browsing the whole topic.

FAQ

Sıkça sorulan sorular

How many feet does a printer need?
Most designs are published as a single foot, so you print as many as your machine has mounting points, usually four. The model page states whether the file is one piece or a set.
Which filament works for anti-vibration feet?
Soft TPU absorbs vibration, while PETG or ABS suits threaded and load-bearing legs. The author's page usually names a material and settings, so start there.
Do these parts need supports?
Many are printed flat and need none, but threaded or overhanging shapes may. The model page and photos of real prints show the orientation the author used.
Can the same foot be used on another printer?
Only if the mounting points or frame profile match. Compare the dimensions and bolt spacing listed on the model page with your machine before printing.
İlgili
Tıp

Human Feet 3D Models: Anatomical and Figure STL

2754 model
Pratik gereçler

Gus Feet 3D Models: Goose, Armor and Mount Parts

4050 model
Pratik gereçler

Duck Feet Stands and Duck 3D Models for Alice

8796 model
Yazıcı parçaları

Bambu Lab A1 Mini Anti-Vibration Feet STL Models

2803 model
Karakterler

Skeleton and Driver Keychain 3D Models to Print

1332 model
Karakterler

Duck 3D Models: Mini, Rubber and Halloween STL

56518 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç