Elektronik

FPV Battery Holders and Cases: 3D Printing Files

This collection gathers STL files for FPV battery holders, protective cases, straps and power modules. It helps you organize packs for drones, goggles and chargers. You can compare how each design mounts, covers or converts a battery. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 59318 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 59318 model
Kategori hakkında

«FPV Battery Holders and Cases: 3D Printing Files»

Common groups include mounts and holders for drone packs, cases and protectors for goggles or transmitter batteries, and modules that turn a pack into a power bank. Some designs use 18650 cells, while others follow a specific pack shape. Differences show up in how the battery is retained, whether a strap or clip is used, and how much of the pack stays exposed.

When choosing a model, check the listed battery dimensions and connector layout, the number of printed parts, and whether the author shows the pack installed. Look at the recommended material and settings, especially if the part flexes or sits near a strap. Photos of real prints can clarify wall thickness, tolerances and how cables are routed.

To narrow the search, try terms such as battery mount, battery tray, pack protector, charging hub holder, strap mount, and power bank module. Related searches include goggle battery case, 18650 holder, and drone battery clip. Combining a drone or goggle type with the part type can surface more specific designs.

FAQ

Sıkça sorulan sorular

What should I measure before printing an FPV battery holder?
Measure the pack's length, width, height and connector position, then compare those figures with the dimensions on the model page. Check whether the design expects a strap, clip or screw fixing.
Can I print battery holders in different materials?
Many designs list a preferred filament and settings, but the choice depends on where the part sits and how much flex it needs. TPU appears in flexible straps and protectors, while rigid plastics appear in trays and cases.
How do I find a case for a specific goggle battery?
Search by the battery shape, cell type or goggle series, and look for models that show the battery inside. Terms like battery case, holder, tray and protector can lead to different mounting styles.
What is a power bank module in this context?
It is a printed housing or adapter that pairs an FPV pack with a conversion board. Check the model page for the board size, cell count and wiring layout shown by the author.
İlgili
Elektronik

FPV Mark 4 3D Models: STL Parts for Frames and Mounts

7323 model
Elektronik

7-Inch FPV Drone STL Models and Printable Parts

13098 model
Elektronik

FPV Spool and Reel STL Models for 3D Printing

13638 model
Elektronik

FPV Battery Holders and Cases: STL Files to Print

5357 model
Elektronik

FPV Seven-Inch Drone 3D Models and STL Files

84454 model
Alet ve ekipman

FPV Stand 3D Models: Launch Pads and Desk Stands

514289 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç