Hobi ve kendin yap

FPV Mark 4 drone STL mounts and TPU parts

This collection gathers STL parts for FPV Mark 4 drones, from antenna and camera mounts to TPU protection kits. It helps you find printable brackets and covers when you are repairing or rebuilding a frame. The models vary in shape and mounting points, so the exact part depends on your setup. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 167868 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 167868 model
Kategori hakkında

«FPV Mark 4 drone STL mounts and TPU parts»

The main groups are antenna and video transmitter mounts, action-camera and air-unit holders, GPS and receiver brackets, TPU frame covers, and power-connector or arm brackets. Some parts are simple single-piece brackets, while others are multi-part kits that combine several holders. Differences come from the frame layout, the antenna type, and whether the part wraps around a tube or screws to a plate.

Before printing, open the author's model page and check the dimensions, the number of parts, and whether supports are needed. Look at the material and settings the author lists, since TPU and rigid filaments behave differently on the same shape. Photos of real prints can show how the part sits on the frame and where fasteners go.

If a direct search is too narrow, try related terms such as FPV drone mount, antenna bracket, camera holder, GPS mount, or TPU kit. You can also search by frame size, tube diameter, or the connector type you use. Combining a frame name with a part name usually returns more focused results than a single broad query.

FAQ

Sıkça sorulan sorular

What types of Mark 4 FPV parts can be 3D printed?
Common parts include antenna mounts, camera holders, GPS brackets, TPU covers, and connector brackets. The exact selection depends on the frame and electronics layout.
How do I choose the right mount for my FPV drone?
Check the mounting pattern, the diameter of the tubes or plates, and the space around the camera or antenna. Compare those measurements with the dimensions on the model page.
Which filament is used for FPV drone mounts?
TPU is often used for parts that need some flex or impact resistance, while rigid filaments appear for brackets that must hold shape. The author's page usually lists the material and print settings.
Can I adapt a Mark 4 mount to a different frame?
Sometimes a mount can be scaled or modified if the mounting points are close. Check the model page for notes on dimensions and remixes before you print.
İlgili
Hobi ve kendin yap

3D Models for Mark 4 and Mark 5 FPV Frames

3870 model
Elektronik

FPV Mark 4 3D Models: STL Parts for Frames and Mounts

7323 model
Elektronik

FPV Mark 4 V2 3D Printing Parts and Mounts

513265 model
Taşıtlar

FPV Drone 3D Models: Frames, Mounts, Propellers

5357 model
Taşıtlar

FPV Mark 7 Legs: 3D Models and STL Files

2739 model
Elektronik

FPV Mark 4 Drone 3D Printing Mounts and Parts

176401 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç