Elektronik

FPV Mark 4 V2 3D Printing Parts and Mounts

This collection gathers STL files for FPV Mark 4 V2 builds, including antenna mounts, GPS holders, camera brackets, TPU kits and frame plates. It helps you find printable parts for a 3D printer when replacing or adapting hardware on this frame family. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 513265 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 513265 model
Kategori hakkında

«FPV Mark 4 V2 3D Printing Parts and Mounts»

The models in this collection fall into several practical groups. Antenna and video-transmitter mounts position gear at the rear or side of the frame, while GPS and receiver holders keep navigation modules in place. Camera and action-camera brackets differ by camera size and mounting angle, and TPU kits or frame plates cover protection and structural needs. Power connector brackets and light covers address wiring and visibility.

When choosing a part, check the dimensions and scale listed on the author's page, the number of pieces in the set, and whether supports are needed for the chosen orientation. Look at the material and print settings the author notes, since TPU and rigid filaments behave differently around thin arms and screw holes. Photos of real prints can show how the part sits on the frame and where fasteners pass through.

To refine the search, try synonyms and related terms such as antenna holder, GPS mount, camera bracket, TPU kit, side plate, or connector bracket. Adding frame size, camera type, or mounting position to the query can narrow results. Related topics include FPV frame accessories, drone camera mounts, and printable protection parts for multirotor builds.

FAQ

Sıkça sorulan sorular

What parts are usually printed for an FPV Mark 4 V2 frame?
Common printed parts include antenna mounts, GPS holders, camera brackets, TPU kits, side plates, and power connector brackets. The exact set depends on the frame size and the hardware being fitted.
Which material should be used for these mounts?
The material depends on the part. TPU is often chosen for flexible mounts and protection, while rigid filaments are used for brackets and plates that need stiffness. Check the author's notes for the material they used.
How can I check a mount against my frame?
Compare the dimensions, hole spacing, and mounting position on the model page with your frame and hardware. Frame versions and camera sizes can change the required layout.
Do these parts need supports when printed?
Some shapes print without supports, while others need them for overhangs or screw holes. The author's page often states the orientation and support needs.
İlgili
Taşıtlar

FPV Drone 3D Models: Frames, Mounts, Propellers

5357 model
Elektronik

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061 model
Elektronik

STL Files for 8-Inch FPV Drone Frames and Mounts

2301 model
Elektronik

FPV Mark 4 V2 and O4 3D Printed Mounts and Parts

2988 model
Hobi ve kendin yap

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

2441 model
Pratik gereçler

Mark 4 V2 7 3D Models: Mounts, Helmets, Covers

612886 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç