Hobi ve kendin yap

FPV Mark 4 V2 9-Inch 3D Models and STL Parts

This collection gathers STL files for large FPV Mark 4 V2 builds, from frame plates to antenna and camera mounts. It helps you find parts for a 9-inch quadcopter project and compare how different authors approach the same frame layout. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 47 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 15.10.2026

Koleksiyonu gör Tümünü göster: 2441 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2441 model
Kategori hakkında

«FPV Mark 4 V2 9-Inch 3D Models and STL Parts»

The models split into structural and accessory groups. Frame plates, side covers, and arm-related parts define the frame geometry, while GPS holders, antenna mounts, camera brackets, and TPU kits attach to it. Some parts are simple plates; others are multi-part assemblies with specific screw or zip-tie points.

When choosing a part, check the listed frame size and mounting pattern, the number of pieces, and whether the author shows assembly steps. Look at the recommended material and print orientation, and review photos of actual prints to judge fit and surface finish. For structural parts, consider layer direction and wall thickness; for flexible accessories, note the filament type the author used.

To refine the search, try synonyms such as quadcopter frame, antenna holder, GPS mount, camera bracket, or TPU accessory. Related terms like arm, side plate, landing foot, and action-camera mount can surface parts that use different wording. Combining the frame family with a size class or component name usually narrows the results.

FAQ

Sıkça sorulan sorular

What parts are usually included in a Mark 4 V2 9-inch collection?
Common parts include frame plates, side covers, GPS and antenna mounts, camera holders, and TPU accessories. The exact mix depends on the authors who uploaded the models.
How do I know which frame size a mount fits?
Check the title and description for the frame size and mounting pattern. Look for dimensions or a diagram on the model page, and compare them with your frame.
What should I check before printing a structural part?
Review the author's notes on material, wall count, and print orientation. Photos of printed parts can show how the part sits on the frame and where fasteners go.
How can you tell if a mount fits another FPV frame?
Some mounts follow a particular frame layout, while others use generic hole spacing. Compare the mounting points and dimensions before printing.
İlgili
Elektronik

FPV Drone 3D Models: Frames, Mounts and TPU Parts

2061 model
Elektronik

STL Files for 8-Inch FPV Drone Frames and Mounts

2301 model
Hobi ve kendin yap

3D models for FPV Mark 4 V2 frame accessories

472034 model
Elektronik

3D Models for 10-Inch FPV Frames and Mounts

2587 model
Elektronik

FPV Drone Frame and Mount STL Models for 3D Printing

2391 model
Elektronik

FPV Mark 4 V2 3D Printing Parts and Mounts

513265 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç