Elektronik

FPV VTX Mounts and Parts: 3D Models to Print

This collection gathers STL files for FPV video transmitter mounts, camera canopies, cooling fan brackets and frame accessories. It helps you find printable parts that organize video gear on drones and small aircraft. Check dimensions and mounting patterns before you print. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 26851 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 26851 model
Kategori hakkında

«FPV VTX Mounts and Parts: 3D Models to Print»

The models here cover several roles: mounts that hold a video transmitter or camera, canopies that cover an all-in-one camera and transmitter, brackets for cooling fans, antenna holders, riser plates and small frame accessories. Some parts are simple plates with screw holes, while others are shaped covers or pods that enclose electronics and route cables. The differences matter because a part made for one frame layout or board size may not match another.

Before printing, read the author's notes for size and scale, the number of parts, and whether supports are needed. Check the mounting hole spacing, the board dimensions, and the material and settings the author lists. Photos of real prints can show how the part sits on a frame and where fasteners go.

To narrow the results, try terms such as video transmitter mount, VTX bracket, camera canopy, antenna holder, or cooling fan duct. Related searches include FPV camera mount, drone frame accessory, and flight controller stack spacer. Combining a part type with a frame size or board size can reduce the list to models closer to your build.

FAQ

Sıkça sorulan sorular

What is an FPV VTX mount used for?
It holds the video transmitter on a drone or small aircraft and often routes cables or antenna. Some designs combine the mount with a camera canopy or cooling fan bracket.
How do I choose the right VTX mount?
Check the mounting hole pattern, board dimensions, and the space around the camera and antenna. Read the author's notes on material and settings before printing.
Do these parts need supports?
It depends on the shape; flat plates may print without them, while canopies and pods often need supports. The author's page usually states the intended orientation and whether supports are needed.
Can I use these models for different frame sizes?
Many mounts are designed around a specific board size or frame layout, so check the dimensions before printing. Scaling a model can change screw holes and wall thickness, so review the author's notes first.
İlgili
Pratik gereçler

FPV Drone VTX Mounts: 3D Models and STL Files

43710 model
Elektronik

VTX Mounts and Holders for FPV Drone 3D Printing

12134 model
Pratik gereçler

Basher 5 VTX Mounts and 3D Printing Parts

89825 model
Elektronik

VTX VT-40 3D Models and STL Files for Printing

77142 model
Elektronik

FPV Mark 4 3D Models: STL Parts for Frames and Mounts

7323 model
Elektronik

7-Inch FPV Drone STL Models and Printable Parts

13098 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç