Alet ve ekipman

M34 Nut 3D Models: STL Fasteners and Knobs

This collection brings together 3D models built around the M34 nut and the parts that go with it, from plain hex shapes to threaded knobs, T-nuts and generator scripts. The files come as STL meshes that you slice for your own 3D printer. It is useful when a matching hardware nut is awkward to find or when a printed part has to meet a specific thread. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 12.10.2026

Koleksiyonu gör Tümünü göster: 121601 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 121601 model
Kategori hakkında

«M34 Nut 3D Models: STL Fasteners and Knobs»

The models fall into a few groups. Knobs and grips wrap a standard nut so it can be turned by hand, while fastener sets gather many thread sizes into one download. T-nuts slide into aluminium profiles and rails, and parametric generators produce a thread from values you enter rather than a fixed shape. Each group solves a different problem, so the first step is deciding whether you need a single part or a whole set.

Before printing, open the author's page and read what is listed there: the thread pitch and outer size, the number of separate parts, whether the model is meant to be printed in one piece or assembled, and any note about supports. Check the photos of real prints to see how the thread came out. A quick measurement in the slicer against the screw you plan to use saves a failed print.

If the results are thin, try other names for the same idea: hex nut, cap nut, dome nut, threaded insert, threaded knob, or the profile system the nut is meant for. Searching by the thread designation alone often misses models filed under a general fastener collection. Related topics such as bolts, washers, spacers and thread repair pieces usually lead to the same authors and similar geometry.

FAQ

Sıkça sorulan sorular

Can a printed M34 nut replace a metal one?
A printed nut carries far less load than a steel one, so it is usually chosen for light duty or for parts that are turned by hand. The material and wall thickness decide how much force it tolerates.
Why does a printed nut come out too tight?
Shrinkage during cooling and the squashed first layers change the internal thread. A small clearance offset or a slight scale change in the slicer often brings the fit back.
What should I check on the model page before printing?
Look for the pitch and outer dimensions, the part count, whether supports are needed, and the material and settings the author lists. Photos of finished prints show how the thread actually looks.
How do I find models for other thread sizes?
Search by the thread designation, or use broader terms such as hex nut, cap nut, T-nut and threaded knob. Collections and generators usually cover a range of sizes in one file.
İlgili
Alet ve ekipman

1/8 Nut 3D Models: STL Files for Threaded Parts

12319 model
Alet ve ekipman

3D Models of Nuts, Screws and Threaded Parts

567334 model
Alet ve ekipman

Nut Caps and Bolt Covers: 3D Models and STL

75220 model
Alet ve ekipman

Bolts and Nuts STL Models for 3D Printing

13596 model
Alet ve ekipman

3D Models of Bolts and Nuts for 3D Printing

119350 model
Alet ve ekipman

Wing nut knobs for bolts: 3D models

41002 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç