Alet ve ekipman

Sleeve and Trap 3D Models: STL Files to Browse

This collection gathers STL files for sleeves, holders, trays and traps of many kinds, from card deck boxes to small insect traps. It is useful when you want a printed cover, an organizer or a simple mechanism and prefer to start from a file someone already modeled. Each entry leads to a model page where the author describes the 3D printing details. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 46 model 6 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 11.10.2026

Koleksiyonu gör Tümünü göster: 21090 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 21090 model
Kategori hakkında

«Sleeve and Trap 3D Models: STL Files to Browse»

The models fall into a few groups. Sleeves range from thin covers that wrap a card, a lighter or a small device to rigid cases with a lid or a magnetic closure. Traps differ by mechanism: some use a funnel or a one-way opening, others a bait chamber or a snap plate. Organizers and trays sit between the two, holding a stack of sleeved cards, lighters or small parts in a fixed layout. Some files are parametric, so the size or the number of slots can be changed before export.

Before printing, read the model page rather than the picture alone. Check the outer dimensions and wall thickness, the number of separate parts and how they join, and whether the author states that supports are needed. Look at the material and settings listed, since a thin sleeve and a stiff box behave differently in the same filament. Photos of real prints show how the surfaces, hinges and tolerances came out.

If the results are thin, try other words for the same object: case, cover, sheath, holder, box, tray, dispenser, catcher or snare. Related searches help too, such as deck box, card organizer, lighter case, bait station or desk tray. Combining a material or a size with the object name usually narrows the list faster than a single broad term.

FAQ

Sıkça sorulan sorular

What do sleeve models usually include in the file?
Most are a single shell, sometimes with a separate lid, insert or clip. The model page lists the parts and whether they print as one piece or need assembly.
How do I pick between a thin sleeve and a rigid case?
Compare the wall thickness and the dimensions given by the author. A thin wall flexes more, while a thicker one keeps its shape, so the choice depends on what you are putting inside.
Do trap models need extra hardware?
Some rely only on printed parts, while others use springs, magnets, wire or a mesh that you supply. Check the parts list and the assembly notes on the model page.
Can these models be scaled up or down?
Scaling changes wall thickness and clearances, so a scaled version may no longer fit its contents or snap together. Adjust only after checking the stated dimensions.
İlgili
Alet ve ekipman

Spinning Holder 3D Models and STL Files

1035 model
Alet ve ekipman

Silicone Mold Forms: STL Models for 3D Printing

24237 model
Alet ve ekipman

Knife Accessories: 3D Models and STL Files

14199 model
Alet ve ekipman

5 mm Bolt 3D Models and STL Files

6324 model
Alet ve ekipman

3D Models of Milling Cutter Holders and STL Racks

526632 model
Alet ve ekipman

3D Models of Rolling Pins and Rollers for 3D Printing

13964 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç