工具与设备

Sleeve and Trap 3D Models: STL Files to Browse

This collection gathers STL files for sleeves, holders, trays and traps of many kinds, from card deck boxes to small insect traps. It is useful when you want a printed cover, an organizer or a simple mechanism and prefer to start from a file someone already modeled. Each entry leads to a model page where the author describes the 3D printing details. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

本合集的文字为英文，搜索本身支持任何语言。

Polyzon合集 · 46个模型 来自6个平台

合集是如何整理的

此合集由Polyzon根据已接入平台的搜索结果整理而成：去除重复项和没有预览图的模型，匹配度低的排在最后，其余按搜索结果顺序排列。模型归作者所有——请在各模型页面查看使用条款。

筛选规则：Polyzon编辑部 · 文字更新于2026年10月11日

查看合集 查看全部21090个模型 →
合集

从这里开始

合集中的全部模型

查看全部21090个模型
关于此分类

«Sleeve and Trap 3D Models: STL Files to Browse»

The models fall into a few groups. Sleeves range from thin covers that wrap a card, a lighter or a small device to rigid cases with a lid or a magnetic closure. Traps differ by mechanism: some use a funnel or a one-way opening, others a bait chamber or a snap plate. Organizers and trays sit between the two, holding a stack of sleeved cards, lighters or small parts in a fixed layout. Some files are parametric, so the size or the number of slots can be changed before export.

Before printing, read the model page rather than the picture alone. Check the outer dimensions and wall thickness, the number of separate parts and how they join, and whether the author states that supports are needed. Look at the material and settings listed, since a thin sleeve and a stiff box behave differently in the same filament. Photos of real prints show how the surfaces, hinges and tolerances came out.

If the results are thin, try other words for the same object: case, cover, sheath, holder, box, tray, dispenser, catcher or snare. Related searches help too, such as deck box, card organizer, lighter case, bait station or desk tray. Combining a material or a size with the object name usually narrows the list faster than a single broad term.

FAQ

常见问题

What do sleeve models usually include in the file?
Most are a single shell, sometimes with a separate lid, insert or clip. The model page lists the parts and whether they print as one piece or need assembly.
How do I pick between a thin sleeve and a rigid case?
Compare the wall thickness and the dimensions given by the author. A thin wall flexes more, while a thicker one keeps its shape, so the choice depends on what you are putting inside.
Do trap models need extra hardware?
Some rely only on printed parts, while others use springs, magnets, wire or a mesh that you supply. Check the parts list and the assembly notes on the model page.
Can these models be scaled up or down?
Scaling changes wall thickness and clearances, so a scaled version may no longer fit its contents or snap together. Adjust only after checking the stated dimensions.
相关
工具与设备

Spinning Holder 3D Models and STL Files

1035个模型
工具与设备

Silicone Mold Forms: STL Models for 3D Printing

24237个模型
工具与设备

Knife Accessories: 3D Models and STL Files

14199个模型
工具与设备

5 mm Bolt 3D Models and STL Files

6324个模型
工具与设备

3D Models of Milling Cutter Holders and STL Racks

526632个模型
工具与设备

3D Models of Rolling Pins and Rollers for 3D Printing

13964个模型

全部3D模型分类

完整的主题目录：从家居日用到CNC，均可在已接入的来源平台中搜索。

查看分类目录