Elektronik

3D models for 6.5-inch speaker grills and rings

This collection gathers 3D models for 6.5-inch speaker grills, mounting rings and adapters used in car audio and DIY enclosures. You can find protective grilles, vehicle-specific rings and patterned covers. For 3D printing, the main points to check are the outer diameter, screw hole spacing and the depth needed for the driver. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 5 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 10.10.2026

Koleksiyonu gör Tümünü göster: 131107 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 131107 model
Kategori hakkında

«3D models for 6.5-inch speaker grills and rings»

The models in this collection range from simple protective grilles to mounting rings and combined grille-and-tweeter mounts. Some are designed around a specific door or panel shape, while others follow a generic round or oval outline. Patterned covers, such as honeycomb or pin-wheel designs, change the look and the amount of open area around the cone.

When choosing a file, compare the listed outer diameter and cutout dimensions with your driver and the space where it will sit. Check how many parts the model has, whether the author shows an assembly sequence, and if the design expects screws, clips or adhesive. Look at the material and layer settings the author lists, and review photos of actual prints to judge surface finish and alignment.

To refine a search, try synonyms like speaker cover, woofer grille, mounting ring, adapter ring and bezel. Related terms include door pod, baffle, spacer and tweeter mount. Adding the nominal size or the vehicle model to the query usually narrows the results to the shape you need.

FAQ

Sıkça sorulan sorular

What does 16.5 cm mean for a speaker grill?
It usually refers to the nominal outer diameter of a 6.5-inch driver, but the actual mounting hole and screw spacing can differ between models. Check the dimensions on the author's page before printing.
Do I need a mounting ring as well as a grill?
A ring can adapt a speaker to a door or panel, while a grill protects the cone. Some files combine both functions, so compare the part list and the intended mounting method.
Which measurements should I compare first?
Start with the outer diameter, the cutout diameter, the screw hole pattern and the depth behind the grill. These determine whether the printed part will align with your driver and the space around it.
Can I change the size of a speaker grill model?
Scaling a file changes all dimensions, including wall thickness and screw holes. If you need a different size, look for a model made for that nominal size or edit the source file carefully.
İlgili
Elektronik

3D Models for Speaker Grills and Mounts

2959 model
Elektronik

Speaker Grill 3D Models for 165 mm Drivers

33492 model
Elektronik

Speaker Grills for 16 cm Drivers: 3D Models and STL

2797 model
Elektronik

3D Models for 16 cm Speaker Grills and Covers

1996 model
Elektronik

Speaker Grill 3D Models and STL Files

17492 model
Taşıtlar

Opel Speaker Grille STL Models and Adapters

5400 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç