Bahçe

Hydroponic 3D Models: Towers, Lids and Planters

This collection gathers 3D models for hydroponic growing: stackable towers, planters and pots, lids for jars and trays, and small water fittings. Most of them are made for a 3D printer and are meant to be combined into a working setup rather than used as single decorative pieces. The range helps you pick parts that match the space you have and the plants you want to grow. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 48 model 4 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 13.10.2026

Koleksiyonu gör Tümünü göster: 5508 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 5508 model
Kategori hakkında

«Hydroponic 3D Models: Towers, Lids and Planters»

The models fall into a few groups. Modular towers and stackable sections form the largest part, and they differ mainly in diameter, number of planting levels and how the sections lock together. Alongside them are lids and propagation covers that sit on jars, buckets or trays, plus pots and planters sized for herbs, salads and microgreens. Smaller parts such as drains and water outlets complete a build.

Before printing, open the author's model page and read the listed dimensions: outer diameter, height per section, pot opening and the volume of the reservoir. Check how many parts a model has and whether assembly needs screws, seals or tubing. Look at the material and settings the author lists, since parts that hold water or sit in sunlight behave differently in different filaments, and check photos of real prints to judge wall thickness and surface finish.

Search results improve when you vary the wording. Try terms like vertical garden, stackable planter, net pot, propagation lid, microgreens tray or nutrient film, and combine them with words such as modular, wall-mounted or balcony. Related topics include aquaponics, seed starting, self-watering pots and indoor garden lighting, which often lead to parts that fit the same setups.

FAQ

Sıkça sorulan sorular

What can I grow in a printed hydroponic tower?
Small leafy greens, herbs, strawberries and microgreens are the usual choices, because their root volume fits the narrow planting pockets. Check the pocket size and spacing on the model page before committing to a crop.
Which filament works for parts that touch water?
Authors usually name the material they printed with, and many choose PETG or ASA for wet and sunlit parts. Read that note and the layer height and wall count they list, then decide what fits your own setup.
Do these models need supports?
It depends on the geometry: towers with overhangs and internal channels often do, while flat lids and simple pots may not. The model page or the included files usually show the intended orientation.
How do I scale a model to fit my jars or pipes?
Measure the jar mouth or pipe diameter first, then compare it with the dimensions given by the author. Uniform scaling changes wall thickness too, so adjust only within the range the author describes.
İlgili
Bahçe

Water Sprinkler STL Models for Garden 3D Printing

48196 model
Bahçe

3D Models for Hose Tees and 3/4 Fittings

12211 model
Bahçe

Moss Pole and Plant Support 3D Models to Print

160221 model
Bahçe

Bubble-Texture Planters: 3D Models and STL Files

2445 model
Bahçe

Garden Fence STL Models for 3D Printing

52603 model
Bahçe

Plant Pot STL Models for 3D Printing

99094 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç