Bahçe

3D Models of Wavy Self-Watering Planters (STL)

This collection brings together 3D models for planters that pair a wavy outer shape with wick-based watering. Files range from a single pot with an inner reservoir to multi-part sets with separate inserts and level indicators. It helps if you want to print a container that keeps soil moisture between waterings. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

Bu koleksiyonun metni İngilizce; arama ise her dilde çalışır.

Bir Polyzon koleksiyonu · 41 model 3 siteden

Bu koleksiyon nasıl oluşturuldu

Polyzon bu koleksiyonu bağlı sitelerdeki arama sonuçlarından oluşturur. Tekrarlar ve önizlemesi olmayan modeller çıkarılır, zayıf eşleşmeler sona alınır, geri kalanlar arama sırasını korur. Modeller yazarlarına aittir; her modelin sayfasındaki koşulları kontrol edin.

Seçim kuralları: Polyzon editör ekibi · Metin güncellendi: 14.10.2026

Koleksiyonu gör Tümünü göster: 2512 model →
Koleksiyon

Buradan başlayın

Bu koleksiyondaki tüm modeller

Tümünü göster: 2512 model
Kategori hakkında

«3D Models of Wavy Self-Watering Planters (STL)»

The models differ mainly in how the water is stored and delivered. Some use a wick that draws water up from a reservoir below the soil, others add a visible level indicator or a drip tray, and a few are built as a set of pots sharing one watering base. Wavy and sculptural shells appear both as simple vases and as full planters with an inner basket.

Before printing, open the author's model page and read the listed dimensions, wall thickness and number of parts. Check whether the model needs supports, how the reservoir and the soil basket fit together, and which material and settings the author names. Photos of real prints are the quickest way to judge how the wavy surface and the inner cavity come out on a filament 3D printer.

If the results feel narrow, try related wording: self-watering planter, wick irrigation, sub-irrigation pot, cachepot, water level indicator, drip tray, or vacation watering. Searching for wavy vase, sculptural planter or geometric pot can surface shapes that work with an added wick insert. Combining a shape term with a watering term usually narrows the list faster than either word alone.

FAQ

Sıkça sorulan sorular

How does wick watering work in a printed planter?
A wick runs from a water reservoir up into the soil basket and moves moisture by capillary action. The pot therefore needs a separate water chamber and a way to refill it without flooding the soil.
What should I check before printing a wavy planter?
Look at the outer size, the wall thickness of the wavy shell, the number of parts and how they join. The author's page usually states whether supports are needed and which material and settings were used.
Do these planters need a water level indicator?
Not always, but an indicator makes refilling easier because you can see how much water is left. Some models include one as a separate part, others rely on a transparent section or an open reservoir.
Can I scale a self-watering planter model up or down?
Scaling changes wall thickness and the fit between the reservoir and the soil basket, so small parts may stop matching. Check the clearances the author lists and test the fit before printing a full-size version.
İlgili
Bahçe

Fitilli sulamalı saksı 3D model

96679 model
Bahçe

Fitilli kendinden sulamalı 3D saksı modelleri

121650 model
Bahçe

Fitilli sulama için 3D model ve STL dosyaları

61259 model
Bahçe

Wave Planter 3D Models: STL Pots and Vases

88380 model
Bahçe

Wick Watering Box 3D Models and STL Files

221341 model
Bahçe

Wavy Vase and Planter STL Models for 3D Printing

3170 model

Tüm 3D model kategorileri

Ev ve günlük yaşamdan CNC'ye kadar tüm konuların kataloğu; bağlı sitelerin hepsinde arama yapabilirsiniz.

Kategori kataloğunu aç